• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

What are the advantages of a 5.0 EFI?

  • Thread starter Thread starter brtnstrns
  • Start date Start date Jun 5, 2004

brtnstrns

Member
Dec 19, 2003
606
11
19
Lewisville, TX
Jun 5, 2004
#1
  • Jun 5, 2004
  • #1
What advantages does the Fuel Injection have over a normal carb engine? and also is it hard to set up the computer for it if you were to put it into a 66 mustang?
 
R

Ronstang

New Member
Apr 4, 2004
1,294
0
0
Houston Texas
Jun 5, 2004
#2
  • Jun 5, 2004
  • #2
The benefits are numerous. Improved fuel economy and lower emmisions are just the tip of the iceberg. With fuel injection the car always runs good because it is constantly adjusting itself to optimal tune, within it's ability. The computer compensates for altitude (mass air only) so you can drive across country and over the mountains without missing a beat. The car will start on the first bump of the key usually and tune up intervals are fairly long. You also get the benefit of more low end torque because of the long runner intake design. I could go on but I think you get the point. The only real downside to EFI can be the high cost of entry sometimes. If you can find a complete donor car for cheap then you are set but if you start hopping up the engine the aftermarket parts can cost quote a bit so I usually suggest buying them used.

There are so many reasons to use EFI these days, especially in a Ford since the system is so easy to learn and adapt to an early car, about the hardest thing is finding a place to put the computer. There is no need to "setup" the computer as long as you are using mass air and your engine is not super radical. I have had built 351 Windsors run quite fine on the stock computer, albeit a chip and some tuning on the laptop made it run better it did run quite nicely on the stock maps.
 
T

TT670

Founding Member
Jul 10, 2001
360
9
28
Jun 5, 2004
#3
  • Jun 5, 2004
  • #3
I agree 100% the EFI is an easy installation. Get yourself a couple for EFI books from amazon and read up on stuff, check out sites like www.fordfuelinjection.com, and www.ronmorrisperormance.com and go to town, its very rewarding and when you're done you'll have a decent understanding of the ford EFI. And it looks awesome, Check it out This is my 331 EFI in a 65, makes roughly 400hp on a stock A9P EEC IV system, using a C&L mas air meter, 70mm Throttle body and 24# injectors. Built my own harness and EFI system using mostly information from www.fordfuelinjection.com
 

Glen's 1965 5.0

Founding Member
Feb 5, 2001
477
0
0
Tomball,Texas
Jun 18, 2004
#4
  • Jun 18, 2004
  • #4
Ditto

These guys have nailed it. I really like the EFI setup and they way it runs and performs.
 
M

mustangracer

Founding Member
Jun 15, 1999
360
0
0
Southern California
Jun 18, 2004
#5
  • Jun 18, 2004
  • #5
I've heard from other people all the above advantages, I guess I'll find out though, I'm in the midst of changing mine over to EFI.

Anyone have any objections to using a A9P(auto equiv to the A9L) computer on a 5 speed car? I've read somewhere that the timing is a little different but that's about it.
 
You must log in or register to reply here.

Similar threads

Y
Speed density 302 to carb 351W
  • yaboity
  • May 29, 2026
  • Fox Engine Swaparoo
Replies
1
Views
108
Fox Engine Swaparoo May 29, 2026
AeroCoupe
B
Idler pulley as substitute for Power Steering Pump ?
  • Bhenders
  • Jul 15, 2026
  • Other Auto Tech
Replies
5
Views
134
Other Auto Tech Jul 16, 2026
LILCBRA
A
Help ID - Turbo GT, SVO differences
  • aldoelmalo
  • Jun 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
97
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 2, 2026
aldoelmalo
A
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
216
1996 - 2004 SN95 Mustang -General/Talk- Sunday at 2:52 PM
JohnKay
J
Weber Carburetor tuning help
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
99
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?