Any recommendations? For a 351c 2v, x-celerator intake man, comp cams ( Dur at .050: 230 int 230 exh / Lift: .530” int .530” exh / Lobe separation angle 110) Edelbrock performer 750vs. Looking for a good distributor, decent price and a place to order it online. Thanks.
I'd just use a stock points type with a Pertronix unit in it. I'm fixing to put together a similar 351C except with an Edelbrock dual plane and a Holley carb.
i got an accel for 100, ripped out the points and put in a pertronix. as long as there arent any points, and as long as you have vacum advance (ok, electronic advance can too) then you should be good. the large radius dist. can be a pain in the ass though, stock should run to a high rpm without cross fire. spend your $ on an MSD box and coil, not just all on a dist