• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What do i need and where do i find it??

  • Thread starter Thread starter Kdubslugga
  • Start date Start date Oct 30, 2005

Kdubslugga

Active Member
Jun 7, 2003
1,515
3
38
Akron, OH
Oct 30, 2005
#1
  • Oct 30, 2005
  • #1
I just bolted on a adjustable FPR and got a Fuel Pressure Guage from Summit, i thought that the fittings would come with it so i could just bolt it up to the Schrader valve and be done with it, now im all over the place looking for what i need to finish the job. What do i need ?? And where the heck do i find it?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 30, 2005
#2
  • Oct 30, 2005
  • #2
Fuel pressure gauge adapter fittings:
http://www.holley.com/products.asp?product=17945NOS AN 4 to 1/16” pipe
http://www.holley.com/products.asp?product=16785NOS 1/16” male pipe to 1/8” female pipe

Or

See http://www.autometer.com/cat_accessorieslist.aspx?pid=10

For more info, see http://forums.stangnet.com/showthread.php?t=588569&
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Oct 30, 2005
#3
  • Oct 30, 2005
  • #3
you can get the fitting from www.summitracing.com; I had the same problem when I got my gauge. I looked but can't find the size of the the fitting you need. The BBK one I have now has the stupid fitting with itamnit:

Take my advice - be careful when you install the fitting/gauge...don't overtighen or you'll break the fitting off in the fuel line and be searching for a new fuel line...I did that and it sucked.
 

Kdubslugga

Active Member
Jun 7, 2003
1,515
3
38
Akron, OH
Oct 30, 2005
#4
  • Oct 30, 2005
  • #4
So i went to Summit, and the guy told me to take out the Schrader valve and jost bolt in a 90 degree fitting, is that all i have to do???
 

Kdubslugga

Active Member
Jun 7, 2003
1,515
3
38
Akron, OH
Oct 30, 2005
#5
  • Oct 30, 2005
  • #5
bump
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Oct 30, 2005
#6
  • Oct 30, 2005
  • #6
yes you can, but it still has to to a 1/16 fitting, which you will have to get from summit or some other speed shop. autometer carries it also.
 

Kdubslugga

Active Member
Jun 7, 2003
1,515
3
38
Akron, OH
Oct 30, 2005
#7
  • Oct 30, 2005
  • #7
OK thanks guys got it now
 
You must log in or register to reply here.

Similar threads

S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
63
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
2
02 mustang gt crank no start
  • 2v.cjmullis
  • Jan 28, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
329
1996 - 2004 SN95 Mustang -General/Talk- Jan 30, 2026
Noobz347
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
522
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
107
SN95 V6 Mustang Tech May 23, 2026
DPP
D
J
Fuel Fuel Pressure Issue
  • justadude07
  • May 12, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
403
Fox 5.0 Mustang Tech May 12, 2025
justadude07
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?