I believe it's through a circuit breaker mounted to the solenoid, do your door locks work? I think it is the same circuit breaker.
Not sure. @Blown88GT has the evtm for a 88, it may be the same.
Electrical - Power Lumbar power feed
I have a 1986 LX 5.0 that had a newer interior installed. I believe it’s from 91-93. The seats have power lumbar, and the PO wired the power straight to the battery, through the boot in the steering column. They did put an online fuse in it, but is there somewhere else I can pull power from...www.stangnet.com
p. 12 & 76 of 1988 EVTM
Circuit Breaker for Power Door Locks, Power Windows, Lumbar Seats
CB is at Starter Relay.
Yes, I've done that. There's no power at the plug under the seat but it has continuity. The switch and the pump work fine if I power the plug on the seat side. I just need to see if it holds air just to know the seat side is 100%.Start checking for power at the connector under the seat and the switch on the seat.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?