what mods do you have planned for this year?

autumn_again · Jan 1, 2009

what are you planning on getting done to your car this year?

set of drag wheels waiting for tires for front then ordering rear tires and rims.
sct tuner, waiting on bamachips to get them in stock and ship mine.
aluminum 1 piece driveshaft
tubular k member
adjustable struts
eibach drag shocks
new midpipe and axle back.

got other plans too but these are the major ones for now, with the tracks opening in march. want to have a solid 12 second car. need some seat time.

what about you guys?

BLKNED · Jan 1, 2009

I am planning to start on the "waiting to be installed" stuff below tomorrow. Beyond that, who knows.

bigcat · Jan 1, 2009

line locks and slicks.

newskool · Jan 2, 2009

whatever the House Commander (wife) will allow me to buy.

walter · Jan 2, 2009

Definitely trying to finish up my front suspension with struts, springs, and GT500 strut mounts, if I'm lucky I'd like a 1 piece driveshaft, a midpipe, brakes stuff, and if I'm really lucky the Roush front end.

Steel Horse · Jan 2, 2009

Suspension, CAI/tune, and whatever cheap fun goodies I might find.

DarkFireGT · Jan 2, 2009

Clutch and flywheel, since I melted my clutch to my flywheel the last time at the track. Otherwise, I'm not sure. I want to spray and would like a 1 piece driveshaft, along with skinnies for the front.

ApexStang · Jan 2, 2009

Depending on if we get a bonus, I will be paying off the Mini Van then purchasing:

Kooks Long Tubes plus Catted H Pipe
Spec 2+ Clutch
Spec Aluminum Flywheel
Aluminum Drive Shaft
Ford Racing 3.73 Gears

Come on bonus!!!!!

BLAKDOUT · Jan 2, 2009

P&P Heads, Comp Cams, CMDP's, and maybe even put her on the bottle a bit....then go find my buddy with his 2000 ss camaro and take him for a

orange 07 · Jan 2, 2009

Steeda pulleys
braided brake lines
pypes catted x pipe
One piece driveshaft and whatever else my wife wont notice.

cowtown · Jan 2, 2009

Not much this year, I got most of what I wanted done. With a recent move I'll be tapped out this year I think but if I pie in the sky it it'll likely be..

- Interior upgrades, namely a new Pioneer AVIC
- Fog lights (perferably hidden behind my grille

What I would really like is a new set of Shelby CS-66 and tires, I had originally planned for that but might have to wait, we'll see.

klaw · Jan 2, 2009

cowtown said:
Not much this year, I got most of what I wanted done. With a recent move I'll be tapped out this year I think but if I pie in the sky it it'll likely be..

- Interior upgrades, namely a new Pioneer AVIC
- Fog lights (perferably hidden behind my grille

What I would really like is a new set of Shelby CS-66 and tires, I had originally planned for that but might have to wait, we'll see.

I think Darren at StangMotorsports (Nisku, AB) has some CS66's that he's clearing out .

UrbanRedneck · Jan 2, 2009

I have 4.10s and BMR LCAs/Relocation brackets sitting in my room. Will be ordering longtubes next week and Bassani Race axleback week after. Then if I can scrape some money togher I'd like to replace my ugly ass wheels. All will be going on as soon as it gets nice out.

May not be able to get to the wheels though since I am really, really needing a new toolbox at work, so 3 or 4 grand might have to go towards that.

blackgt460 · Jan 3, 2009

I'm hoping a driveshaft will propel me into the 12 sec zone if not I'd like a set of Mickey T's as well....got twins on the way due in August so I have sneak these mods by the wife but luckily I live ten minutes away from Evolution to avoid having them shipped to my door and getting caught

bigcat · Jan 3, 2009

blackgt460 said:
got twins on the way due in August

congrats! my wife is due in august as well, but we have yet to find out if there is more than one. my mother in law swears its twin girls.

blackgt460 · Jan 4, 2009

my mother in law swears its twin girls. :([/QUOTE said:
Thanks and congrats to you as well.....my luck I would have twin girls as well which is already getting me worked up thinking of the first clown that tries to date one of them...atleast now I have more to think about than Mustang parts

Towelly · Jan 4, 2009

This year for me..... Suspension, suspension, suspension.

I want to get my car planted and get everything dailed this year. Then next year around tax season I hope to do power mod's. I'm still stuck on which way I want to go though. Stay N/A all the way or go supercharged. Either way I'm going to do the bottom end and everything all at once as long as the $$ is there.

Inarticulate · Jan 5, 2009

Hopefully I'll have my Brenspeed tune and 4.10's by the summer. After that, I may finish the front end with the brake duct / lower driving lights kit from Shelby.

ghedeup123 · Jan 5, 2009

Not to sound pessimistic but who knows if I'll have a job this year, so my only mods this year will be modding the amount I pay to my monthly payment to bring down the amount I owe the bank. I'd like it to come down to a level equivalent to or less than the car is worth.

NotQuik · Jan 5, 2009

hoping to get some 4.10's for my b-day and maybe a spoiler for my 95 as well as get the 95 running and back on the road.

what mods do you have planned for this year?

autumn_again

New Member

BLKNED

Member

bigcat

start with the upper hole, and if more traction is

newskool

Active Member

walter

Steel Horse

Member

DarkFireGT

Playing with my wife's really makes me want one.

ApexStang

Member

BLAKDOUT

New Member

orange 07

New Member

cowtown

klaw

Member

UrbanRedneck

New Member

blackgt460

Active Member

bigcat

start with the upper hole, and if more traction is

blackgt460

Active Member

Towelly

New Member

Inarticulate

New Member

ghedeup123

New Member

NotQuik

Similar threads

what mods do you have planned for this year?

New Member

Member

start with the upper hole, and if more traction is

Active Member

Member

Playing with my wife's really makes me want one.

Member

New Member

New Member

Member

New Member

Active Member

start with the upper hole, and if more traction is

Active Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency