What pistons?

[SMOKEDYA]

I have decided to scratch the turbo build and gonna run N/A and the bottle. So what piston should i get to raise my compression?I think i need to pick out the pistons before i do my cam this time. peace


Wiseco PT031H4 - Wiseco Pro Tru Forged Piston Kits – SummitRacing.com

Mahle SBF600040I26 - Mahle PowerPak Piston and Ring Kits – SummitRacing.com

Wiseco PT043H4 - Wiseco Pro Tru Forged Piston Kits – SummitRacing.com










john

 

[SMOKEDYA]

I JUST TALKED TO SUMMIT AND THEY RECOMENDED THIS SET OF PISTONS. tHEY SAY WITH 60CC HEADS IT WOULD BE AT 10:5.1 But with my heads (58cc) i should be right at 11.1 These are the ones they suggested peace
Wiseco PT031H4 - Wiseco Pro Tru Forged Piston Kits – SummitRacing.com











john

 

[SMOKEDYA]

I JUST TALKED TO SUMMIT AND THEY RECOMENDED THIS SET OF PISTONS. tHEY SAY WITH 60CC HEADS IT WOULD BE AT 10:5.1 But with my heads (58cc) i should be right at 11.1 These are the ones they suggested. I also figured since i'll have the motor this far apart i might as well install these to COMP Cams 31-1000 - COMP Cams Retro Fit Hydraulic Roller Lifter Kits – SummitRacing.com
Wiseco PT031H4 - Wiseco Pro Tru Forged Piston Kits – SummitRacing.com peace













john

 

[white 89 GT]

Those will do the trick, whats the weight on those.

 

[SMOKEDYA]

Good question! I'd have to call them back and see. Is that gonna throw off the balancing of the motor?Is your times in your sig with the 331? peace









john

 

[90lxcoupe]

This dosent seem like a very smart decision, your going to have to pull the motor, rebalance the assemble, rehone the cylinders and put new rings in it.

Nitrous is great, but it gets expensive filling a bottle all the time, and if you already built a low comp motor, just put forced induction on it. You took 1 step forward, and now you are going 5 back

 

[white 89 GT]

Good question! I'd have to call them back and see. Is that gonna throw off the balancing of the motor?Is your times in your sig with the 331? peace









john

Yeah 331 and an AOD