Car spun the rollers at a tune of 495.6 rwhp and 511tq. Tuner had to let off at 5500 to avoid detonation. So peak numbers are only at 5500 with the HP still climbing. Also this was done with a Cobra intake. Ive since switched to a Systemax and all the neccessary fuel upgrades to at least spin this thing to 6100 or 6200 rpm. My tuner is Danny Biggs at Anderson, he's pretty confident it will make around 525-530 rwhp. Now my previous best 1/4 was a 11.9 at 123 and that was basically coasting in after the 1000ft mark because i was bouncing off the rev limiter of 5500 set on the PMS. Also a slippin sliding 1.89 60ft, I had stock axles then, i now have Moser 31 splines. So provided a good launch lets say 1.5 or 1.6 60ft and an additional 25 or so HP running all the way through the traps, are 10's possible?
This is a street car, not a drag car, full interior, no ac, no smog, aluminum heads, etc. Does have Drag Springs and Lakewood struts and shocks
This is a street car, not a drag car, full interior, no ac, no smog, aluminum heads, etc. Does have Drag Springs and Lakewood struts and shocks