I bought a grill delete kit, and the replacement part doesn't fit flush with my bumper. I plan on using the "foam tape" that comes with some kits, but didn't come with mine. I don't feel comfortable removing my headlights to bolt the panel to my bumper so here I am.
I did not use any kind of tape or whatsoever for my grill delet install. And I don't remeber the instaructions specifying the use of any tape. What are you guys talking about? My grill delete kit looks great and tight.
I did not use any kind of tape or whatsoever for my grill delet install. And I don't remeber the instaructions specifying the use of any tape. What are you guys talking about? My grill delete kit looks great and tight.
there are two types I believe, one bolts to the bumper cover the other uses double sided foam tape instead. If done right both look great but the tape method you have to be a little more patient.
I beleive it is called 3M 2way acrylic bonding tape....it is gray, white or black. The gray is very aggressive..used to hold molding and trim on cars.You can find small rolls at Pep Boys or auto supply stores. HTH
there are two types I believe, one bolts to the bumper cover the other uses double sided foam tape instead. If done right both look great but the tape method you have to be a little more patient.
Actually removing the headlights couldn't be simplier. You just pull the two (on each headlight) headlight retaining clips on the back of each headlight. Then the whole headlight assembly simply comes right out...just disconn the electrical connects to the headlight and the side marker. I was amazed how simple this really is. It goes back together the same way.