• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

what to do about govener

  • Thread starter Thread starter horsepower302
  • Start date Start date May 26, 2007
H

horsepower302

New Member
Jan 17, 2007
48
0
0
May 26, 2007
#1
  • May 26, 2007
  • #1
my friend has a 1995 crown vic with a 4.6 he put 4.10 rear end gears in it the govener is 120 at 120 it is 73 mph it shuts down at the 1/8 mile what can he do to take the govener off it is obd-2
 
H

horsepower302

New Member
Jan 17, 2007
48
0
0
May 27, 2007
#2
  • May 27, 2007
  • #2
does any body know what to do about this
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
May 27, 2007
#3
  • May 27, 2007
  • #3
You'll need a flash programmer. SCT and Diablosport are a couple of names to do a search for.
 
H

horsepower302

New Member
Jan 17, 2007
48
0
0
May 27, 2007
#4
  • May 27, 2007
  • #4
thanks
 

montegoman351

Member
Jan 12, 2007
169
1
18
May 27, 2007
#5
  • May 27, 2007
  • #5
I'm thinking that that transmission still has a speed sensor. If it is a '95 CV, it should still have a AOD-E and there should be a speed sensor in the tailhousing. It is a sensor that sticks out the driver's side and has an electrical plug on it. If it is there, have you changed the driven gear on the sensor, IF I remember correctly, that year still had a sensor, and the speed limiter and such is run off of it.

That would be my first thought, especially with the speedometer being off.
Speed sensor: http://www.fordfuelinjection.com/index.php?p=33
Gear calculator: http://www.sccoa.com/faq/speedgr.html
 
H

horsepower302

New Member
Jan 17, 2007
48
0
0
May 27, 2007
#6
  • May 27, 2007
  • #6
he took it to the tranny shop and they changed the gear in the tail shaft it put the speedometer closer to being right but it is shutting down now at a 100mph wich is still 73mph so he went to summit and he told me they have a programmer that might work for a 96 mustang but he has to call the company that makes it and give them the code of the computer to see if it will work i think some of the taurus have the same computer in them the sho anyways i dont know for sure
 

montegoman351

Member
Jan 12, 2007
169
1
18
May 28, 2007
#7
  • May 28, 2007
  • #7
Gotta' be a V8 computer to swap, if you can find a programmer that will take off the governor, of raise it more, that would work great.
Or you can always try a CV police computer if you consider a PCM swap. The P71 (police model code in the VIN) computer have a higher governor and a higher rev limiter and a firmer shift strategy and...all to try to catch the bad guys.
Usually, a PCM from a P71 can be found at a reasonable junkyard for less than $50. The one near me charges $35 with a warranty and usually has several.
I don't know what else to tell you, is it hitting the rev limiter or the speed governor? You say you had the gear changed in the tail housing, and it got the speedometer closer but still cut off at 73. It sounds more like it is hitting the CONSERVATIVE rev limiter.
Is this a civilian Crown Vic?
 
H

horsepower302

New Member
Jan 17, 2007
48
0
0
May 28, 2007
#8
  • May 28, 2007
  • #8
its my bosses it never was a police car but yea it hits 100mph now and it shuts down you let it slow down 2mph it will go until it hits 100
 

montegoman351

Member
Jan 12, 2007
169
1
18
May 29, 2007
#9
  • May 29, 2007
  • #9
Is it going 100mph, or is the gauge still off.
Did you tune it, or did the gear fix it.
If he still wants more, you can grab a P71 PCM.
 
H

horsepower302

New Member
Jan 17, 2007
48
0
0
May 29, 2007
#10
  • May 29, 2007
  • #10
the gauge is still off 100mph is only 73mph im going to tell him tommarow thanks for all your help i just wanted to tell you that in case i forgit
 
H

horsepower302

New Member
Jan 17, 2007
48
0
0
May 31, 2007
#11
  • May 31, 2007
  • #11
well i want to say thank you montegoman351 told my boss what you said get a p71 computer he got one i put it in for him tonight and it worked i just wanted to thank you for all your help thanks again horsepower302
 
You must log in or register to reply here.

Similar threads

S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
556
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
370
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
1K
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
9
Views
514
Other Auto Tech Oct 23, 2026
JH96GT
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?