What type of oil????

[MyBloodRunsBlue]

Ok, so i recently got Crower stage 2 blower cams for my car and when i called crower they said that i shouldn't run synthetic....is that correct?? if so what kind of oil should i run....give me any recommendations!!!!!!!!

 

[blksq10psi]

if your charger is lubed from your motor you have to run synthetic dont you?

 

[02nightmaregt]

Did they say not to run full syn? If so is it ok to run a syn. blend? I don't see why they would say that. I mean ive heared of not running syn trans fluid but thats because it would i guess make the friction material on the blocking rings, etc. lose soemof its friction. If that makes any sense.

 

[Tazzy]

did they say only use dino oil for initial break in of the cams then later you can switch to synthetic?

 

[MyBloodRunsBlue]

dino sounds familiar but i'm not 100% sure...i'm going to call them tomorrow and see what they say bc like blk said earlier, i thought you were supposed to run synthetic w/ the blower

 

[02nightmaregt]

yea thats what im thinking too. Ill bet they meant to use break in oil first then switch it over

 

[MyBloodRunsBlue]

how long is the break in period?

 

[Tazzy]

contact the manufacturer of the cams to find the break in recommendations.

 

[MyBloodRunsBlue]

thanks..i will do so

 

[blksq10psi]

if the cams need less than syn maybe pull the s/c a break it in then re install the blower after break in? ( if thats the case i would throw thoes cams right thru crowers front window!!)

 

[MyBloodRunsBlue]

i was now told that the blower does not have to have synthetic oil ran through it to run properly

 

[CobraRed_96_GT]

If it's not synthetic it's called conventional - or semi-syn. You can still run a varying viscosity/mulit grade like 10W-30, just use to conventional version, dino means the same thing because it comes from the earth (dead dino's) and isn't made inhouse.

 

[blksq10psi]

....... ive had problems vith my sq 1500 mi after i got it (full kit from vortech w/ warr) and the bearings went bad then 3 months after i got it back same thing and vortechs turn around time is like 2-3 months then the secont time i got someone elses blower i opened up the box and it was chrome and smaller i had to ship it back overnite and work them over to pay for shipping. i like to run the syn only for that reason i dont wanna ship it out again cuz next time im gonna drive my car with the charger on it thru their front door (not really but im an angry dude) 2 rebuilds in 9 months and its been in shipping longer than its been on the car im going on a year no probs yet ...

 

[Roblu98]

....... ive had problems vith my sq 1500 mi after i got it (full kit from vortech w/ warr) and the bearings went bad then 3 months after i got it back same thing and vortechs turn around time is like 2-3 months then the secont time i got someone elses blower i opened up the box and it was chrome and smaller i had to ship it back overnite and work them over to pay for shipping. i like to run the syn only for that reason i dont wanna ship it out again cuz next time im gonna drive my car with the charger on it thru their front door (not really but im an angry dude) 2 rebuilds in 9 months and its been in shipping longer than its been on the car im going on a year no probs yet ...

You are like a broken record! How many times are we going to here this story! Maybe if you changed your oil more than every 10,000 miles you would not have this problem! Get a Procharger next time!

 

[blksq10psi]

your such a loser rob ..get your belt to hook around your pulley then talk to me "i got a 2.8" pulley and only pullin 6 psi " hahahahaha that arsonist is back running around chestercounty again

 

[MyBloodRunsBlue]

so you think i will be fine running a conventional oil or a semi synthetic oil?

 

[blksq10psi]

if it was me id have to go w/ semi syn

 

[Tim2002GT]

so you think i will be fine running a conventional oil or a semi synthetic oil?

If and when I do cams, I am going to continue to use full synthetics. I'm thinking they meant to use conventional for the break-in.

 

[Tazzy]

General tech help and information

[email protected]

1-619-661-6477