• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Whats causing this?

  • Thread starter Thread starter MY 85 GT
  • Start date Start date Aug 31, 2008

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Aug 31, 2008
#1
  • Aug 31, 2008
  • #1
I just noticed this the other day only happening on 1 side and only in this spot....its dis-coloring...I have no idea whats causing this..

http://i44.photobucket.com/albums/f19/myhemi/DSC00042.jpg


http://i44.photobucket.com/albums/f19/myhemi/DSC00041.jpg
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Aug 31, 2008
#2
  • Aug 31, 2008
  • #2
Well, assuming you're not running lean on that side, it's probably just a spot where there isn't enough coating and they've started to rust early. Just to be safe, go out and drive your car for about 1/4 mile at 35mph, and shut the car off while going 35 (don't let it come down to an idle). Be sure to be on a back road where it's safe to do since you'll lose power steering and brakes. Then, pull the plugs from the side of the engine that's rusting and see if they're white looking. That'll tell you if they're lean or not.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Aug 31, 2008
#3
  • Aug 31, 2008
  • #3
85_SS_302_Coupe said:
Well, assuming you're not running lean on that side, it's probably just a spot where there isn't enough coating and they've started to rust early. Just to be safe, go out and drive your car for about 1/4 mile at 35mph, and shut the car off while going 35 (don't let it come down to an idle). Be sure to be on a back road where it's safe to do since you'll lose power steering and brakes. Then, pull the plugs from the side of the engine that's rusting and see if they're white looking. That'll tell you if they're lean or not.
Click to expand...

Thats the side i was told that runs leaner on a 5.0...thats were i have my Air fuel gauge the o2 sensor is in the bung just in front of that spot...By the air fuel gauge it doesnt seem to be running lean...I did pull the plugs out the other day to inspect them not after doing a 35 mph pass...They always come out clean and like the day i put them in...I still wonder by having that the stock intake on there with no EGR valve spacer an no emissons anymore if im screwing up something...I mean if you take my carb off the gasket has a hole burnt in it...and that port if full of black caked up carbon....not a pretty sight....I have to get a intake ont here just didnt have the chance..hope im not hurting anything.....
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
703
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
334
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
I
98 Mustang GT dying
  • ItsMason
  • May 14, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
244
1996 - 2004 SN95 Mustang -General/Talk- Jun 25, 2026
lenzgt
L
Car vibrating
  • Creomod
  • Dec 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
286
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 9, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?