Well my neighbor was digging through his garage and found a set of 24lb injectors and a c&l maf meter and i have a 75mm bbk tb that i haven't installed yet. How much hp is that worth? And what would be a good bargin for the two?
Unless you have heads from what I know it will only hurt your hp, thats too much injector. But if you can get em for a deal than maybe they can come to good use in the future?
If you sig is the extent of your mods, it would be a complete waste of money at this point. They would be great for when/if you ever get your blower, but for a stock engined car it would probably actually hurt performance and economy.
Will hurt the car. The injector wants a nice even pulse which a 19lber would give. Over injecting it will give a heavy short pulse which will hurt your performace (gas mileage and track performance). I have stock 19s on my car trapping 107+ and have no issues at all. Might try some 24s because we have them!
i'd grab them if you plan to get some heavy upgrades later get them and wait, you could put the MAF on and get a 19lb tube for the meter. it would be fine, but leave the injector off until you really need the fuel.
stock injectors actually go a long way and can support alot of power.