• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

whats wrong now?

  • Thread starter Thread starter tsoccer3299
  • Start date Start date Jul 26, 2006

tsoccer3299

Member
Mar 21, 2004
255
0
16
Tacoma
Jul 26, 2006
#1
  • Jul 26, 2006
  • #1
Ok so my car was running fine one week ago and siince then the alternator started going out, two shops tested it and said that it was done. So now I get a new alternator, put everything in and now I have a couple new noises. It sounds like I have some sort of fan on and also like the belt is making a clicking sound. I'm guessing it could be the clutch in my a/c compressor that is going out? It sure sounds like it is in that area. This sound goes on and off and I can only really hear it sometimes at idle. My a/c still works but it makes a different sound when on and off, and it seems like it maybe should be a little cooler. Now today I drove it home from work, a/c was on light and i stopped at a friends house for 5 mins and shut the car off. Go back to start it up and it starts then dies, it did this 5 or 6 times and after starting it I kept the rpms up so it wouldnt die, then drove it home. It was also putting some smoke out the exhaust everytime i would try and start it again, sorry I didnt notice the color but guessing it was maybe just burning extra gas.

Sorry this is so long but I'm guessing I should just get a new a/c compressor instead of just getting the clutch? Seems like I heard its much easier to just replace the whole thing and then I dont have to worry about it. Where should I get one
Thanks
Tommy
 

tsoccer3299

Member
Mar 21, 2004
255
0
16
Tacoma
Jul 26, 2006
#2
  • Jul 26, 2006
  • #2
nobody with any ideas?
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 27, 2006
#3
  • Jul 27, 2006
  • #3
start out by removing the belt and check the a/c pulley and see if it binds up or turns freely... repost results....it could be the a/c pulley bearings going out...
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Jul 27, 2006
#4
  • Jul 27, 2006
  • #4
start it without the belt too to rule in or out the acessories making the noises....
 

tsoccer3299

Member
Mar 21, 2004
255
0
16
Tacoma
Jul 28, 2006
#5
  • Jul 28, 2006
  • #5
took the belt of and it feels like the whole a/c pully is loose. I dont know if this means its the bearings or the clutch but I think I'm going to buy a remanufactured compressor with clutch from schucks for $170. Do I really need a new receiver drier/accumulator and expansion valve/orifice tube???????
 
You must log in or register to reply here.

Similar threads

T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
458
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
B
Need help 1995 mustang wiring
  • bugz
  • Apr 14, 2025
  • 1994 - 1995 Specific Tech
Replies
1
Views
146
1994 - 1995 Specific Tech Apr 14, 2025
Noobz347
S
Need help asap
  • shaggyman65
  • Dec 24, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
262
1996 - 2004 SN95 Mustang -General/Talk- Dec 24, 2025
shaggyman65
S
Engine A/C QUESTION
  • Mindseye007
  • Jun 5, 2025
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
60
Views
2K
Fox 5.0 Mustang Tech Jun 22, 2026
nicholase
F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
319
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?