Where can I find a 351C engine?

Davon Ervin · May 29, 2018

Hello,

I’ve been doing tons of research trying to find a 351c engine to swap in my s197 but I’m a little confused as to where I should purchase one? My goal is about 600hp with a supercharger. I found a remanufactured 351c here https://sdparts.com/i-24076957-atk-...H4dV21-ciPc5z9CcewwB6u17HPEtMVrEaAgXGEALw_wcB

Noobz347 · May 29, 2018

I'm confused as to why anyone would want a Cleveland in a an S197.

The 351 CJ (now referred to as the "351 4V") was rated at 255 hp (190 kW) in 1974 and was only installed in the Ford Ranchero, Ford Torino, Mercury Montego, and Mercury Cougar.

Davon Ervin · May 29, 2018

I have a 2006 mustang GT with the 3v 4.6l V8. My motor is on its way out the door. The transmission is literally garbage from the factory (5r55s). I want something unique as this car is no longer my daily driver. Wait I thought the 351C was in the 1970 Mustang Mach 1?

Noobz347 · May 29, 2018

Davon Ervin said:
I have a 2006 mustang GT with the 3v 4.6l V8. My motor is on its way out the door. The transmission is literally garbage from the factory (5r55s). I want something unique as this car is no longer my daily driver. Wait I thought the 351C was in the 1970 Mustang Mach 1?

There were R and Q code engines that will cost you a mint. Doesn't make a ton of sense to pay a premium for one of these just to replace all the internals even [if] you could get your hands on one.

horse sence · May 29, 2018

You will probably have a problem with smog and DMV if you want to drive it on the street .
I have a couple of 351 CJs,taken apart . I have closed chamber heads and open CJ heads from 72 -73 mustangs ,CJ BLOCKS ARE 4 BOLT MAINS AND NOT CHEAP

Davon Ervin · May 29, 2018

horse sence said:
You will probably have a problem with smog and DMV if you want to drive it on the street .
I have a couple of 351 CJs,taken apart . I have closed chamber heads and open CJ heads from 72 -73 mustangs ,CJ BLOCKS ARE 4 BOLT MAINS AND NOT CHEAP

I live in South Carolina. No vehicle inspections of any kind here. If a Cleveland engine is a stretch. I will settle for a 351w but would rather keep searching for a Cleveland.

WORTH · Jun 1, 2018

IF your just looking for a crazy alternative 460's are easier to find.

Davon Ervin · Jun 1, 2018

WORTH said:
IF your just looking for a crazy alternative 460's are easier to find.

351 Cleveland is not an option anymore.. too expensive to build. I found a few 460 engines on eBay cheaper than the 351W! I’m going to the book store later to grab a few books on Small and big block fords and see what I can dig up. I really want a 6-71 blower with a 351w but I’m afraid it won’t have any kind of street manners whatsoever.

WORTH · Jun 2, 2018

Davon Ervin said:
351 Cleveland is not an option anymore.. too expensive to build. I found a few 460 engines on eBay cheaper than the 351W! I’m going to the book store later to grab a few books on Small and big block fords and see what I can dig up. I really want a 6-71 blower with a 351w but I’m afraid it won’t have any kind of street manners whatsoever.

If you want agressive and street friendly in a stang , I'd go 302/351w, and no blower, if you have your heart set on old school.

General karthief · Jun 2, 2018

I usually don't hang around here, I just cruze through once in a while to see what the members are up too. I'm from the old school, because of my age , and I like different, in your face, sticking through the hood unruly surging roots blower whining cruze'n around scaring small children and large animals! A 460 ci with a roots blower would be a good 'different' power plant for s197, there are enough of those blocks around and with a BDS or Weiand blower expect to spend 15 to 20 k. I say go for it, I would ask that you start a thread to document your build with pics, I'd follow it!

stanley514 · Jun 2, 2018

Davon Ervin said:
Hello,

I’ve been doing tons of research trying to find a 351c engine to swap in my s197 but I’m a little confused as to where I should purchase one? My goal is about 600hp with a supercharger. I found a remanufactured 351c here https://sdparts.com/i-24076957-atk-...H4dV21-ciPc5z9CcewwB6u17HPEtMVrEaAgXGEALw_wcB

I have a set of 351c 4v heads.

Where can I find a 351C engine?

Davon Ervin

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Davon Ervin

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

horse sence

Davon Ervin

Member

WORTH

Davon Ervin

Member

WORTH

General karthief

wonder how much it would cost to ship you a pair

stanley514

Similar threads

Where can I find a 351C engine?

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

Member

wonder how much it would cost to ship you a pair

Similar threads

Privacy & Transparency

Privacy & Transparency