Does anyone know where I can get the tint that goes on the headlights and foglights? I'm looking for a smoke color that won't have to be taken off everyday to be legal.
I just got some yellow fog lamp covers for mine. I saw some the mustangs in the Grand Am series with them on. They looked pretty nice. Here is the place where you can get em. http://www.pcpcdallas.com/index.asp
199 Those look nice. Did you use any solutions to apply them? did you clean the lens?
I got some instuctions with the covers but they seem kinda unclear as to what you should use when putting them on. My plan is to clean the fog lamps and put them down with a credit card or drivers license. I do not want any moisture or air bubbles.
you can get them from www.stickercity.com...speak to Andy over there and tell him chris from B&M referred you..They used my car to prototype the lenses and their product is very nice...
my are from Lamin-X,
anyways i used a water/soap mixture,
I first cleaned the lens with windex, then with alcohol wipes i wanted to make sure they were real clean,
I then sprayed on the water/soap mixture and then aligned the yellow clear film, and used one hand holding the film the other to remove the water, with a flexible plastic tool (i don't know what its called but a credit card would be good too)
I remove most of the bubbles, and let it dry out in the HOT sun for hours,
and thats it,, don't use windex on them after the installation for cleaning,
you will notice a few bubbles after you remove all the bubbles that you can, these will become smaller or disappear after you let it dry, after it dries it will be around 95%(+-) bubble free, you can only see the bubble when u look at them directly
if u need any help i will be glad to answer your questions