• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Which cam????

  • Thread starter Thread starter erniet17
  • Start date Start date Apr 9, 2008

erniet17

Member
Oct 4, 2005
124
1
17
Apr 9, 2008
#1
  • Apr 9, 2008
  • #1
Here's my setup. Edelbrock Performer RPM heads with the 1.90/1.60 valves, GT-40 tubular, 70mm TB, stock mass air for now, 1.6 RR, 5-speed, 3.73 gears, shorty headers with offroad h-pipe, flowmasters, pulleys. It is going to be a daily driver but I want it to be as fast/streetable as possible.

What cam should I use for this set up? I called a custom cam company and they initially suggested this cam assuming that I didn't want to go above 6000 RPM: .515/.535 lift, 220/228 duration on a 110 LSA. He told me that the Mass Air would take care of the idle on the 110 LSA.

I called today and I told them that I wanted to go with a higher lift and higher RPMs and they suggested this: .555/.555 lift, .230/.235 duration on a 112 LSA.

What do you guys think? Is it worth it or do I go with an off-the-shelf cam? I know that I can have them build the cam however I want but I just want some feedback from others. Thanks!!!
 
You must log in or register to reply here.

Similar threads

N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
334
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
P
Cam spec
  • peter.farina
  • Nov 29, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
382
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 22, 2025
Ric4eyedFox
R
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
P
Cam spec
  • peter.farina
  • Oct 27, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
299
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 27, 2024
TOOLOW91
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
323
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?