The setup:
331 stroker
TW heads that flow 290/212
1.6 RR
Vic Jr intake
650 speed demon carb
3/8" fuel line with a high flow mechanical pump
3.50 gears in a 9"
3300-3500 TCI stall in a built C4
Car weighs about 2700 lbs
Engine should be able to spin to 6500+ no problem (lightweight internals w/ girdle and ARP bolts/Studs)
Two cam choices:
Xe274HR
Specifications:
* Advertised duration: 274 intake/282 exhaust
* Duration at .050 in.: 224 intake/232 exhaust
* Gross valve lift: .555 in. intake/.565 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,200-6,200
* Needs 2,500 stall, 3.55-3.73 gears, better heads, intake, and fuel system
-OR-
Xe282HR
Specifications:
* Advertised duration: 282 intake/290 exhaust
* Duration at .050 in.: 232 intake/240 exhaust
* Gross valve lift: .565 in. intake/.574 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,600-6,500
* Street/strip, needs EEC IV upgrade, heads, intake and gears
Car is NOT a daily driver. It will see a little bit of cruising time and thats about it. MIGHT be raced a few times once the engine is broken in just to see what times it pulls, but thats it.
Let me know what you all think. Or should I post this in race tech?
Shane
331 stroker
TW heads that flow 290/212
1.6 RR
Vic Jr intake
650 speed demon carb
3/8" fuel line with a high flow mechanical pump
3.50 gears in a 9"
3300-3500 TCI stall in a built C4
Car weighs about 2700 lbs
Engine should be able to spin to 6500+ no problem (lightweight internals w/ girdle and ARP bolts/Studs)
Two cam choices:
Xe274HR
Specifications:
* Advertised duration: 274 intake/282 exhaust
* Duration at .050 in.: 224 intake/232 exhaust
* Gross valve lift: .555 in. intake/.565 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,200-6,200
* Needs 2,500 stall, 3.55-3.73 gears, better heads, intake, and fuel system
-OR-
Xe282HR
Specifications:
* Advertised duration: 282 intake/290 exhaust
* Duration at .050 in.: 232 intake/240 exhaust
* Gross valve lift: .565 in. intake/.574 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,600-6,500
* Street/strip, needs EEC IV upgrade, heads, intake and gears
Car is NOT a daily driver. It will see a little bit of cruising time and thats about it. MIGHT be raced a few times once the engine is broken in just to see what times it pulls, but thats it.
Let me know what you all think. Or should I post this in race tech?
Shane