Which stage?

Unless you plan on a turbo or super charger at some point go with the stage 1 or 2. Stage 3 is more for forced induction. My personal choice would be stage 2 which will give you about 80 more hp (over stock) and it's only a couple hundred more.

If you plan on a turbo then stage 3 is the one you want but you should do it all at the same time, no use getting a tune then later having to change it again when you add the turbo. Also running 10 psi you really should to upgrade the internals to keep it all together. Just a guess would be about a 180 - 200 hp increase with all that but you will be forever burning the expencive gas.

brokerdavelhr said:

From what I gather, the intake, cam shaft and head are all part of his package. I am not trying to sound like a cheap bas****, but I am. My whole thing is that I have found that it is always cheaper to do it yourself (if you have the time patients knowledge and resources). I have time, patients, stang-net, and google. So, I am sure there is sopmewhere I can buy all these components seperately, and install them myself? Anyway, let me know if that idea is just off and I should stop being such a cheap ass, and just pay the full monty.

Click to expand...

You're definitely going to want to install the heads/cam at the same time. To really see big gains from either, you'll want them working together. So, a cam that works with the stock heads well, is going to be crappy on well-ported heads. Plus, no reason to take the whole engine apart twice basically. In order to install a cam, you have to take most everything off, anyway, so it makes sense to do the heads then.

BTW, take a look at Super Six Motorsports and Delk Performance (call and ask for Matt if you have any questions) for this stuff... avoid RPM-Mustangs like the plague.

with 10 psi and a stage 3 expect to be at about 400rwhp + depending on the grind of the cam
if you look on tma's site theres a guy with BVH and a cam as well a port and polish job with a turbo running 440rwhp
STOCK internals

im not sure on the psi
with a stock bottom end and top end you'll be good at 10psi with a tune...without would be risky

also dependin on the wear and miles on your engine

brokerdavelhr said:

OK, I think I will be getting the stage three powerpack, 3.8 longblock, a 10+ psi turbo (possibly getting two for kicks and giggles for a total of 20 psi.)with intercooler, pressure release valve, air inductor, new exhaust, computer, under-pulleys (if needed), fuel rail, and all the intermediate parts to make all this happen.
The only catch to this is that price. But what the hell right?
As for the body, I plan on leaving it as stock as possible except for adding the guages. Anyway, thanks for all of your input, it has been most helpful. I will be taking before pictures tomorrow, and hopefully in a year, the finished product will dazzle.
The funny thing is, is people still ask me why I didn't get a v8. The answer is simple. I love my 6, and wouldn't trade it for the world. If I were to win the lottery one day, I would make my stang the most souped up six( under the hood that is) in existance. Screw a ferrari. I love my stang.

Peace

Click to expand...

how much money do you have
a twin turbo kit is about $5,500 alone
fuel pump $110-$130
fuel injectors $360+ depending on injectors


why not get a 4.2L???
4.2L- $4,500(forged internals all the goodies) up to $7k! thats for the full engine, and w/e grinded cam you want
stage 3 heads and a ported and polished upper and lower intake


J on tma has a twin turbo 4.2L full street ar 3900lbs runs over 500rwhp and even more torque with a 11.1 in the 1/4 mile at 15psi

aside from engine and turbo kit which alone would set you back over $10grand
you'll need to beef up the tranny
deffinity need and 8.8 rear with 31spline axles
different clutch probably GT flywheel with a GT stage 3 spec clutch
i'd recommend a aluminum flywheel and driveshaft
upgrade brakes
if you wana go to the track a 6point rollcage cause you'll run faster then 11.50
safety loops
i believe you need 4 harness seats


after that your looking at damm near $15k or more
dont forget to deffinitly get it tuned!