Which Wire to Splice?

[69Rcode_Mach1]

Okay guys I have nothing to do today so I decided to wire up the lights on my autometer guages. Now they have two wires like usual one positive one negative. I have grounded the negatives under the dash. (I have also tested the lights so I know they work) I crawled under the light switch there to see which wire I need to splice into. And there were a bunch coming out of it so scratch that. Now I am here, I have a wiring diagram for the 69's but have no idea how to read it. Anybody know what color the wire is that I need to splice the positive side of the autometer guages into, so that when I click it out once it will come on with my interior lights and then stay on when I click out again to get my headlights on. I know it's a lot but bear with me. I really need to get this done.

 

[shotsy]

It should be the blue wire with the red stripe on the harnes that plugs into your dash cluster.

 

[69Rcode_Mach1]

So your talking about the clip that hooks into the back of my cluster. Oh hell I hope I can reach it without taking that thing out.

 

[shotsy]

you can also find the same blue and red wire for the clock lites an the pass side of the car

 

[69Rcode_Mach1]

Sweet I will check that side out too and see if it's easier to get to for the splice. Thanks Shotsy.

 

[mustangman70]

Also if you have a the gauge pod on the centerconsole there should be a blue with red there also

 

[69Rcode_Mach1]

Thanks mustangman70 I have the gauge pod, but I don't have the console wired up. I did it with the wire by the clock, wasn't a big deal. Thanks for everything guys I appreciate it.

 

[Max Power]

I have a test light that is pointed at the probe end. I just turned lights on and off until my test light lit up. I ended up using a wire by the clock too.