Will a Motorvator work with my CAI?

Hey all. Well, I was shopping around for a cheap performance part and I came across the Motorvator throttle body spacer. From what I can see, it's about one inch wide and they claim something like 10 HP gain to the wheels from it. Thing is, I went under my hood today to see how it would fit, and I honestly don't see how I can move my CAI over far enough to fit the spacer. I emailed RPM Outlet and the tech said that my BBK is very similar to the MAC system they sell and that it would work. However, I was wondering if any of you have installed a throttle body spacer with your intake and, if so, how is it working out for you? Another potential problem is my strut tower brace. If I'm going to be installing the Motorvator, I may have to unbolt it from the fire wall and everything and take it totally out, which would suck. So my real question is, do you think that I would have a problem getting my CAI to work with the spacer? Thanks for any and all input and I'm sorry for dragging out the question.

Thanks guys. Well, my finances turned out a bit lower than what I was hoping for so I won't be able to get it for about two weeks. BUT, on the bright side, I opted for the Mach 1 grill delete since it was cheaper. Should have it at my house in about a week from Steeda. The shop that does my install work said they'd charge me $65 to put the throttle body spacer on. That seems high to me and I was wondering if it's a big deal to slap it in or is it simple? The shop says it'd take about an hour and a half to do. Thanks again.