• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

will my 19lb inj. handle this??

  • Thread starter Thread starter deepsea1969
  • Start date Start date Aug 27, 2005
D

deepsea1969

New Member
Nov 14, 2004
36
0
0
Aug 27, 2005
#1
  • Aug 27, 2005
  • #1
Since I can't get my chip tuned right now i'm going to put my 19lbs inj. back on. Will they be handle the fuel requirements listed in my sig? Of course in my sig it says I have 30lb which I do but my chip isn't tuned. Thanks guys.
 

Daniel50

New Member
Mar 30, 2005
716
1
0
Discovery Bay, CA
Aug 27, 2005
#2
  • Aug 27, 2005
  • #2
your 19lb should be ok but they are getting close to being maxed out do you have a stock cam?
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Aug 27, 2005
#3
  • Aug 27, 2005
  • #3
What meter are you running?
 
D

deepsea1969

New Member
Nov 14, 2004
36
0
0
Aug 27, 2005
#4
  • Aug 27, 2005
  • #4
My cam is stock and so is my meter. I have a SCT chipped that is set up for 30's but isn't tuned. I just don't have the time to get it tuned for a while.
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Aug 27, 2005
#5
  • Aug 27, 2005
  • #5
don't u need a MAF for 30's if you put in 30's??
 
D

deepsea1969

New Member
Nov 14, 2004
36
0
0
Aug 27, 2005
#6
  • Aug 27, 2005
  • #6
No you don't need a Maf for 30's if you have a chip for 30's. You can go with a Maf for 30's instead of a chip. I went that route with a Pro-m and had nothing but problems. I had to have my fuel pressure set to 30 w/no vaccuum for it to run.
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Aug 27, 2005
#7
  • Aug 27, 2005
  • #7
how about for 24s?? Can i just get a chip for that?? How expensive is that
 
D

deepsea1969

New Member
Nov 14, 2004
36
0
0
Aug 27, 2005
#8
  • Aug 27, 2005
  • #8
Yes you can. A chip usually runs around 300 bucks and the tune depending on who does it can be up around 300. I had a guy in San Diego qoute me 700 just to tune the chip I already had. But up here in Wa. I was quoted 230-350,
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Aug 27, 2005
#9
  • Aug 27, 2005
  • #9
19s should be just fine for your combo.
 
D

deepsea1969

New Member
Nov 14, 2004
36
0
0
Aug 27, 2005
#10
  • Aug 27, 2005
  • #10
ok, thanks sleeper
 
S

shorty1993

New Member
Apr 16, 2004
212
1
0
Gadsden, AL
Aug 28, 2005
#11
  • Aug 28, 2005
  • #11
no problem on the 19's. some of the guys around here are using twEECer programs. if you want to take the time to learn it you can tune your own car. i will say that from what i have overseen it will take some patience tho. but after two tunes it has more than paid for itself.
 
S

stang619

New Member
Sep 6, 2004
69
0
0
Aug 28, 2005
#12
  • Aug 28, 2005
  • #12
I tried to run my 19lb. injectors with my new gt-40 crate engine/x heads,e-cam and cobra intake and i get cehck engine light every time i drive it, its running lean with the fuel pressure turned up to 45. Im waiting for my my maf so i can step up to 30 lb. injectors. Good luck
 
D

deepsea1969

New Member
Nov 14, 2004
36
0
0
Aug 28, 2005
#13
  • Aug 28, 2005
  • #13
well, I'll give it a try. What should I bump my fuel pressure to?
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Aug 28, 2005
#14
  • Aug 28, 2005
  • #14
deepsea1969 said:
well, I'll give it a try. What should I bump my fuel pressure to?
Click to expand...
If you put in the 19's. set the pressure to 38-40 PSI with the vacuum off.
 
D

deepsea1969

New Member
Nov 14, 2004
36
0
0
Aug 28, 2005
#15
  • Aug 28, 2005
  • #15
Thanks sleeper.
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
233
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Tunerstudio help / services
  • Kabuki_notch
  • Apr 26, 2026
  • Digital Self-tuning Forum
Replies
2
Views
269
Digital Self-tuning Forum May 2, 2026
Mustang5L5
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
543
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
276
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?