Will this all work together

[GTn00b]

I want to buy a densecharger that connects from the TB to the fender and it says MAF METER NOT INCLUDED, will I have to purchase another one or can I just use the stock one?

Here's all what I'm planning I've got about 1500 to spend on parts. Please help me!!! I want to run a 13.8 or 13.9

Steeda Underdrive pullies
Densecharger full kit
C&L pleum and 75mm TB
I dont know what else please help

 

[madmatt]

Yes, you just use the stock one, most others just cause headaches anyway. I think you should look more into some new rear end gears like some 4.10's and then get some nitto drag radials. They only thing on your list that will really show an improvement is the throttle body/plenum. Good luck though, but if it were me, Id just get a K&N filter, and some 4.10's.

 

[3.8L_of_Pain]

To add to what madmatt said:

With your budget of around $1500, do 4.10 gears, PI 3000 torque converter, Nitto 555R drag radials, and a chip / tuner of your choice. It will cost you a little more than $1500, but this should safely get you in the high to mid 13s.