Window Issues

I had this problem on my Expedition just a month ago. I know it is not the same application, but same manufacturer. I would also here the window switch click as to say it is sending the signal to the motor but no results. What I found to be the problem is that the motor needed cleaning. Inside where the brushes are and the regreased it. The motors do come apart for access to cleaning them. I took the housing off and the pulled the shaft out to get to the brushes. Then that was the cure. Hope this helps.

BTW, I have not had the luxury of getting to a motor on this gen, but on my Expedition the motor was riveted onto the door. So I had to drill the rivets out and then I bolted them back on. Also it is best to undo the track once you have drilled the motor rivets and pull the whole assy out of the door at once track and motor.