• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Wire diagram help

  • Thread starter Thread starter SMOKEDYA
  • Start date Start date Oct 28, 2010

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Oct 28, 2010
#1
  • Oct 28, 2010
  • #1
Anyone know what wires go where?I'm wireing the 05 up slot MAF pig tail into my stock fox harness.peace











john
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Oct 29, 2010
#2
  • Oct 29, 2010
  • #2
If you use anything but the 89-95 Mustang MAF, you'll need a custom tune to match the MAF to your computer.

94-95 Mustang GT MAF - $40-$100. It is 70 MM instead of the stock 55 MM on regular stangs built prior to 94. It uses a slip on duct on the side that goes to the throttle body and a 4 bolt flange on the other. You need a flange adapter to fit the stock slip on air ducting that goes to the air box. Wiring plugs right in with no changes. *1 *2

1.) Metal flange adapter Kurtz Kustomz Motorsports, Inc. KKM Buy the TR70 for $44.95. Or spend some time on eBay looking for one that may fit.
Try AutoZone and ask for 81413 - Spectre / 3 in. Aluminum Intake Mass Air Flow Sensor Adapter at $12.00. You may have to order it online.

*2.) MAF & sensor interchange
The 94-95 Mustang 5.0 MAF & sensor is also found on:
1994-95 Mustang 3.8L F2VF-12B579-A2A,
1992-94 Crown Victoria 4.6L F2VF-12B579-A2A,
1994-95 Mustang, Mustang Cobra 5.0L F2VF-12B579-A2A,
1992-94 Town Car 4.6L F2VF-12B579-A2A,
1992-94 Grand Marquis 4.6L F2VF-12B579-A2A,
Evidently the –A1A, -A2A, AA, etc. on the end of the part number is a minor variant that did not change the operating specs. You should be able to ignore it and have everything work good.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Oct 29, 2010
#3
  • Oct 29, 2010
  • #3
Thanks for the info!But i needed to know off the wires on the 05 pig tail i bought,what wire goes where to my stock fox harness?The 94-04 will probably peg out to soon as for my 90mm lightning one would also.Thats why i bought the slot style HPX MAF to weld into my intake tube.In my 3" tube now i beleive i'm good till 800 HP.peace











john
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Oct 30, 2010
#4
  • Oct 30, 2010
  • #4
Hopefully this is what you're looking for...

 
You must log in or register to reply here.

Similar threads

Electrical Diagrams
  • 3054tony
  • Jul 12, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
451
Fox 5.0 Mustang Tech Jul 17, 2025
Noobz347
Electrical Need help identifying what these electrical items are (93 LX 5.0)
  • dan50
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
156
Fox 5.0 Mustang Tech Apr 12, 2026
dan50
D
Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
163
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
D
C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
90
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
B
Electrical Fuse 8, Light Green / Black Wire
  • bleedinggreen
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
379
Fox 5.0 Mustang Tech Jun 26, 2025
bleedinggreen
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?