Wire Tuck

LessardStang · Mar 2, 2019

Hello, I just bought my son a 1988 mustang GT. He did a wire tuck on it and now it has now power at all. He watched a video on YouTube to see how to do it. Any ideas on how to figure it out without causing anymore issues. He is absolutely heart broken. Been waiting for this car since he was 6 yrs old. Thank you for any help we can get.

General karthief · Mar 2, 2019

we need description of how he did it and possibly some pics.

JD1964 · Mar 2, 2019

No power at all? As if the battery was disconnected?

LessardStang · Mar 2, 2019

John Dirks Jr said:
No power at all? As if the battery was disconnected?

Yes.

LessardStang · Mar 2, 2019

Here is a picture of solenoid. Don’t think it’s connected right.

JD1964 · Mar 2, 2019

I’d have to look at my solenoid to see if it looks different. But I don’t think both of those larger cables are supposed to be attached to the same post. One goes to the battery and the other should go to the starter. At the solenoid, those larger ones should be one on each side of the solenoid. Don’t quote me on that , but I think. I’m sure someone will chime in and confirm me right or wrong.

Have you checked the battery with voltmeter to ensure it is charged?

General karthief · Mar 2, 2019

Look at veryuseful.com for wiring stuff, it has some good info.

Rdub6 · Mar 2, 2019

John Dirks Jr said:
I’d have to look at my solenoid to see if it looks different. But I don’t think both of those larger cables are supposed to be attached to the same post. One goes to the battery and the other should go to the starter. At the solenoid, those larger ones should be one on each side of the solenoid. Don’t quote me on that , but I think. I’m sure someone will chime in and confirm me right or wrong.

Have you checked the battery with voltmeter to ensure it is charged?

I thought the same thing at first about the wires, but when I recently installed my mini starter I had to put them on the same post.

@LessardStang is it the original starter, or newer style “mini” starter?

JD1964 · Mar 2, 2019

Disregard what I said. Look like both large ones are supposed to be on the same post. Here’s what my 93 looks like.

stanglx2002 · Mar 2, 2019

Yes the only cable supposed to be on the left side is the cable to the starter unless you are running a mini starter and then the starter solenoid wire goes there. All the other wires go to the right side including the battery cable. There is a small red/green wire with a 90* connector that goes to the small post. That wire is what actives the starter solenoid when you turn the key.

mikestang63 · Mar 2, 2019

cannot stress enough to take pictures before dissasembly. all the hot wires go to the battery side of the solenoid except the starter on stock appplications

Rdub6 · Mar 8, 2019

Any luck on getting it running?

KZGUNS · Mar 8, 2019

looks like you have a ground hanging loose as well.

Reddevil91 · Mar 8, 2019

I want to wire tuck!! Clean up the bays blah blah. Nah but I want some one to do that for me bc I’m not confident in that one. My buddy is getting a turbo installed on his relatively stock set up besides GT40 iron heads and cobra intake, the guy doing it for him is gonna drop the wiring below the fire wall pinch weld, but also said he was going to cut that pinch weld out or shave it down and weld it. Anyone ever done that?

Mustang5L5 · Mar 8, 2019

LessardStang said:
Here is a picture of solenoid. Don’t think it’s connected right.

No it's not right.

Wire to starter on one side. Everything else on the other side. That's how a stock 88 solenoid with 88 starter is wired

CraigGodwin · Mar 13, 2019

I want to wire tuck!! Clean up the bays blah blah. Nah but I want some one to do that for me bc I’m not confident in that one. My buddy is getting a turbo installed on his relatively stock set up besides GT40 iron heads and cobra intake, the guy doing it for him is gonna drop the wiring below the fire wall pinch weld, but also said he was going to cut that pinch weld out or shave it down and weld it. Also, I bought essay on this website. Something helped. Anyone ever done that?

My uncle in law makes this kind of stuff. I could ask him.

Wire Tuck

LessardStang

New Member

General karthief

wonder how much it would cost to ship you a pair

JD1964

there is enough sticking out to grab on to

LessardStang

New Member

LessardStang

New Member

Attachments

JD1964

there is enough sticking out to grab on to

General karthief

wonder how much it would cost to ship you a pair

Rdub6

So while I wait to figure out my rear end issues

JD1964

there is enough sticking out to grab on to

stanglx2002

CT Material here

mikestang63

Rdub6

So while I wait to figure out my rear end issues

KZGUNS

I can swing up to 11”

Reddevil91

Mustang5L5

That is…until I whipped out my Bissell

CraigGodwin

New Member

Similar threads

Wire Tuck

New Member

wonder how much it would cost to ship you a pair

there is enough sticking out to grab on to

New Member

New Member

Attachments

there is enough sticking out to grab on to

wonder how much it would cost to ship you a pair

So while I wait to figure out my rear end issues

there is enough sticking out to grab on to

CT Material here

So while I wait to figure out my rear end issues

I can swing up to 11”

That is…until I whipped out my Bissell

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency