• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Wiring to key start

  • Thread starter Thread starter DKeen
  • Start date Start date Aug 17, 2005

DKeen

New Member
Dec 6, 2004
43
0
0
Aug 17, 2005
#1
  • Aug 17, 2005
  • #1
I recently purchased an 88 gt that has been rewired to have a push button starter. I still have to turn the key to unlock the steering wheel etc. The button has just 2 wires running into it (from the solenoid?) I was just wondering if there is any way that I can rewire these back to the key.


Thanks, Dan.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 17, 2005
#2
  • Aug 17, 2005
  • #2
Dan, does the key still allow the car to crank?
Were I adding a button, I would do it in parallel to the stock wiring, so the stock stuff still works.

The button likely switches the starter interlock circuit (a la the slide-on wire on top of the solenoid) to 12 volts, thus allowing the car to crank. The key still needs to be at 'run' to actually start the car.

If you can start the car with the key, you can likely simply undo the button's connections. If not, someone probably cut the interlock wire, which runs from the ignition switch to the clutch safety switch/neutral safety switch, and to the solenoid. You will have to trace the wire and restore it.

Good luck.
 

DKeen

New Member
Dec 6, 2004
43
0
0
Aug 17, 2005
#3
  • Aug 17, 2005
  • #3
I can actually start it without the key in there at all, it just unlocks the steering. I think youre right about that wire being cut though, do you have any idea what color wire(s) i should be looking for? Theres so many.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 17, 2005
#4
  • Aug 17, 2005
  • #4
DKeen said:
I can actually start it without the key in there at all, it just unlocks the steering. I think youre right about that wire being cut though, do you have any idea what color wire(s) i should be looking for? Theres so many.
Click to expand...
Knowing the year of stang would help.

The starter interlock (cranking) wire on many models is white/pink.

Here is a diagram by TMoss which might help.

Good luck.
 

DKeen

New Member
Dec 6, 2004
43
0
0
Aug 17, 2005
#5
  • Aug 17, 2005
  • #5
Its an 88, thanks for the diagram it looks like it will help me a lot. I need to hunt down that red/blue wire and hook it up to the top of the solenoid then, right?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 17, 2005
#6
  • Aug 17, 2005
  • #6
AutoZone wiring diagrams

http://www.autozone.com/servlet/UiB..._us/0900823d/80/16/71/3c/0900823d8016713c.jsp for 79-88 model cars

http://www.autozone.com/servlet/UiB..._us/0900823d/80/19/59/5a/0900823d8019595a.jsp for 89-93 model cars

http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp for 94-98 model cars
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 17, 2005
#7
  • Aug 17, 2005
  • #7
DKeen said:
Its an 88, thanks for the diagram it looks like it will help me a lot. I need to hunt down that red/blue wire and hook it up to the top of the solenoid then, right?
Click to expand...
Per Tom's diagram, I think you would want to find the white/pink wire - it should end up at the top of the solenoid.
 

DKeen

New Member
Dec 6, 2004
43
0
0
Aug 17, 2005
#8
  • Aug 17, 2005
  • #8
Thanks a bunch! I got it to work, it doesnt have the cluth/neutral safety switch working, but better than a button that doesnt work half the time.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 17, 2005
#9
  • Aug 17, 2005
  • #9
Cool. If you fix the neutral switch, it needs to be hooked up for the car to start. The guy might have jumped the terminals to accomplish what he did. You could probably disco' the jumped connection and hook the switch back up (if you see a blade fuse in the connector, he jumped it. A blade fuse fits real nice. ).

Glad you got it workin.
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
516
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
3
Electrical Starter solenoid green wire?
  • 387lx
  • Jun 1, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
248
Fox 5.0 Mustang Tech Jun 2, 2026
AeroCoupe
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
235
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
378
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
S
92 5.0 almost starts
  • Steverino
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
272
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 25, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?