• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Electrical Wont start, Clutch-Starter Switch?

  • Thread starter Thread starter borofkad
  • Start date Start date Jan 25, 2013

borofkad

New Member
Jan 25, 2013
6
0
1
Modesto, California
Jan 25, 2013
#1
  • Jan 25, 2013
  • #1
Hi, my 2000 gt has been having problems starting lately, i usually just have to turn the key a few times and then it will start. Well last night that wasn't working. The only way my friend and I got the car to start was to push it and pop the clutch to start it. Do you think bypassing the clutch starter switch would fix my problem? I know thats not very safe but i don't have the money for a new switch at the moment. Someone also suggested it could be my alarm, but if the alarm was the problem I don't think popping the clutch would have started the car. Someone please help.
 
J

jka

5 Year Member
Jan 17, 2010
339
23
29
Jan 25, 2013
#2
  • Jan 25, 2013
  • #2
I think it may be time to replace the starter.
 

borofkad

New Member
Jan 25, 2013
6
0
1
Modesto, California
Jan 25, 2013
#3
  • Jan 25, 2013
  • #3
its not the starter.
 
J

jka

5 Year Member
Jan 17, 2010
339
23
29
Jan 25, 2013
#4
  • Jan 25, 2013
  • #4
Well it could be something with your alarm system/and or ignition switch..but every mustang that i had if i had to get a push and pop the clutch to start it..it was the starter. Do you have to push the clutch pedal to the floor to start it? also when you turn the key can you hear a click or you hear nothing? Have you tried adjusting the rod on the clutch starter switch? so it will start without pushing the pedal to the floor? It just may need adjusting.
 

Jhussey1280

Member
Jan 31, 2012
185
4
19
New Pal, Indiana
Jan 25, 2013
#5
  • Jan 25, 2013
  • #5
When you say it wont start, is it cranking and not firing or does it not crack at all? What exactly is it doing? I mean it could be as simple as a dead battery to something much more involved as an ignition switch, neutral safety switch, etc...
 

borofkad

New Member
Jan 25, 2013
6
0
1
Modesto, California
Jan 25, 2013
#6
  • Jan 25, 2013
  • #6
no its not cranking at all. Battery is fine. All my lights and my radio still turn on. Im also going to check my starter solenoid and see if that might be the problem. Sorry for leaving that out. If that battery was dead i would never jump straight to the clutch switch lol
 
P

PBullitt3255

New Member
Feb 25, 2010
21
0
1
Palm Beach Florida
Jan 25, 2013
#7
  • Jan 25, 2013
  • #7
Do you hear the starter click when you try to start it?
 

borofkad

New Member
Jan 25, 2013
6
0
1
Modesto, California
Jan 25, 2013
#8
  • Jan 25, 2013
  • #8
No clicking. It used to click just once when I would turn the key, but no there is no click at all
 
J

jka

5 Year Member
Jan 17, 2010
339
23
29
Jan 25, 2013
#9
  • Jan 25, 2013
  • #9
It's the starter or solenoid ..what year is your mustang?
 

borofkad

New Member
Jan 25, 2013
6
0
1
Modesto, California
Jan 25, 2013
#10
  • Jan 25, 2013
  • #10
2000.
 
J

jka

5 Year Member
Jan 17, 2010
339
23
29
Jan 25, 2013
#11
  • Jan 25, 2013
  • #11
It's the starter.
 
P

PBullitt3255

New Member
Feb 25, 2010
21
0
1
Palm Beach Florida
Jan 25, 2013
#12
  • Jan 25, 2013
  • #12
Yea I'd bet its starter too, I have a 01 bullitt and the starter just went it did click everytime I turned the key but didn't crank. Maybe the starter went and after keep trying to start it your solenoid went as well. I was wishing it wasn't the starter since its a PITA to get out esp w headers but it ended up being it..i left the top starter bolt out.
 

borofkad

New Member
Jan 25, 2013
6
0
1
Modesto, California
Jan 25, 2013
#13
  • Jan 25, 2013
  • #13
Ill check that out this weekend, ill let you guys know how it goes.
 
You must log in or register to reply here.

Similar threads

A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
182
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
173
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
T
2002 V6 3.8L Help Me
  • TheIncompetentMechanic
  • Apr 4, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
50
Views
697
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
TheIncompetentMechanic
T
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
847
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
821
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?