• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

wont start

  • Thread starter Thread starter 92stang gt 5.0
  • Start date Start date Dec 7, 2003
9

92stang gt 5.0

New Member
Nov 6, 2003
32
0
0
Nashua
Dec 7, 2003
#1
  • Dec 7, 2003
  • #1
the other day i went to start my car and it stumbled 2 times and the 3rd time it started so i didnt think of it then when i got out of work i went to start and it wouldnt at all so i pushed it and dropped and into second and popped the clutch and it started so the next morning i went to start again and it stumbled again then it started and i drove to school fine and when i got out of school it wouldnt start again so i had it towed.......this only when happens when the cars cold after i have started it and i drive it for a little and i can start it fine after it is warmed......does anyone know what this could be and what i can do to fix it.....sorry so long
 

IndyBlk5.0

New Member
Nov 24, 2003
1,122
1
0
New Whiteland, IN
Dec 7, 2003
#2
  • Dec 7, 2003
  • #2
did you advance your timing? what fuel pressure are you running at?
 
9

92stang gt 5.0

New Member
Nov 6, 2003
32
0
0
Nashua
Dec 7, 2003
#3
  • Dec 7, 2003
  • #3
nothin is done the engine is stock beside march ram air
 

IndyBlk5.0

New Member
Nov 24, 2003
1,122
1
0
New Whiteland, IN
Dec 7, 2003
#4
  • Dec 7, 2003
  • #4
92stang gt 5.0 said:
nothin is done the engine is stock beside march ram air
Click to expand...
I had a similar problem with my cutlass, i replaced the coil and it fixed it, but that is just a thought
 
J

jerry beach

Founding Member
May 20, 2002
2,671
0
46
Ocala,FL
Dec 7, 2003
#5
  • Dec 7, 2003
  • #5
Is the engine spinning more slowly than usual when its cold out? May be a sign that the battery or starter are on the way out. Or a loose connection somewhere. Think of simple stuff to check first. Does it always push start fine, or did you have it towed cause it would not push start?
 
9

92stang gt 5.0

New Member
Nov 6, 2003
32
0
0
Nashua
Dec 7, 2003
#6
  • Dec 7, 2003
  • #6
well the starter is new and the battery is somewhat new but its not fully charged that might be it but i had it jumped and it still wouldnt start and when i push started it the second time it wouldnt work and i heard when doin this its not good for the engine and clutch so i just had it towed cause i can for free
 

IndyBlk5.0

New Member
Nov 24, 2003
1,122
1
0
New Whiteland, IN
Dec 7, 2003
#7
  • Dec 7, 2003
  • #7
92stang gt 5.0 said:
well the starter is new and the battery is somewhat new but its not fully charged that might be it but i had it jumped and it still wouldnt start and when i push started it the second time it wouldnt work and i heard when doin this its not good for the engine and clutch so i just had it towed cause i can for free
Click to expand...
Well, i had a problem earlier today when i got on it hard and overheated and stopped, it didnt want to start, but the problem was that i flooded. when you try to start it agian take off the intake pipe and see if there is smoke coming out... Also, you need a good charged battery to start a stang But if you let it sit for an hour or so and it didnt start then that would rule out that
 
9

92stang gt 5.0

New Member
Nov 6, 2003
32
0
0
Nashua
Dec 7, 2003
#8
  • Dec 7, 2003
  • #8
the engine is cranking fine its kind of seems like it isnt getting any fuel.... i dont really know after trying to start it a bunch of times the battery was pretty much dead cause it wouldnt really even crank over so i dont think its the battery it might be i dunno right now
 

IndyBlk5.0

New Member
Nov 24, 2003
1,122
1
0
New Whiteland, IN
Dec 7, 2003
#9
  • Dec 7, 2003
  • #9
92stang gt 5.0 said:
the engine is cranking fine its kind of seems like it isnt getting any fuel.... i dont really know after trying to start it a bunch of times the battery was pretty much dead cause it wouldnt really even crank over so i dont think its the battery it might be i dunno right now
Click to expand...
The shrader valve on the fuel rail is where you can check your fuel pressure. just screw in a fuel pressure gauge into it, if you dont have one. call up a autoparts store and ask them if they have one you can borrow
 
9

92stang gt 5.0

New Member
Nov 6, 2003
32
0
0
Nashua
Dec 7, 2003
#10
  • Dec 7, 2003
  • #10
what if my fuel pressure is bad?
 
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
730
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
313
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
212
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
778
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
182
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?