• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

working with fiberglass

  • Thread starter Thread starter 66moneypit
  • Start date Start date Feb 20, 2006
6

66moneypit

Member
Dec 28, 2004
536
0
17
Northern Va
Feb 20, 2006
#1
  • Feb 20, 2006
  • #1
http://www.caraudiohelp.com/how_to_fiberglass/how_to_fiberglass.htm

Cool looking video if you are interested in working with fiberglass like I am.
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Feb 20, 2006
#2
  • Feb 20, 2006
  • #2
its pretty easy, im gonna make a set of kickpanels for 64-66 with a choice of speakers, see if theres a market for them.

anybody intested in them????I'll have some done by next week.
 

68converted

Member
Nov 19, 2003
772
0
16
Colorado
Feb 20, 2006
#3
  • Feb 20, 2006
  • #3
I goofed around with some stuff my dad had laying around. Then I jumped in and went for it. I just finished laying up the center console. I have a bit of shaping to do before I lay down the final layer and gel coat. I will post some pics in the morning. Next is the spare tire sub enclosure. Too cold now to even think about it for now. ( it's been in the negative numbers here in Colo.)
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Feb 21, 2006
#4
  • Feb 21, 2006
  • #4
yeah, it was cold here too, must've been at least 68-70*.....damn winter
 
6

66moneypit

Member
Dec 28, 2004
536
0
17
Northern Va
Feb 21, 2006
#5
  • Feb 21, 2006
  • #5
68converted said:
I goofed around with some stuff my dad had laying around. Then I jumped in and went for it. I just finished laying up the center console. I have a bit of shaping to do before I lay down the final layer and gel coat. I will post some pics in the morning. Next is the spare tire sub enclosure. Too cold now to even think about it for now. ( it's been in the negative numbers here in Colo.)
Click to expand...

Check your PMs 68converted
 

allcarfan

The Answer Man
Founding Member
Apr 8, 2001
2,458
1
56
North Atlanta
Feb 21, 2006
#6
  • Feb 21, 2006
  • #6
kick panels with speakers in them? I dont know about the market for them, but they have been around for years and years. The hours that you will have in making them and the cost of materials (about $50), you will have to begin to weigh that against the cost that you could buy new.
 

68converted

Member
Nov 19, 2003
772
0
16
Colorado
Feb 21, 2006
#7
  • Feb 21, 2006
  • #7
iskwezm said:
yeah, it was cold here too, must've been at least 68-70*.....damn winter
Click to expand...

Bastard! I used to live in SoCal- San Diego. Gowd do I miss it. I would move back now that I am divorced but I would miss my son way too much. Sorry OT.

I think I will be doing the wire frame on the sub enclosure today. I will post some pics on it, and the console I have been working on, later today.
 

68converted

Member
Nov 19, 2003
772
0
16
Colorado
Feb 21, 2006
#8
  • Feb 21, 2006
  • #8
allcarfan said:
kick panels with speakers in them? I dont know about the market for them, but they have been around for years and years. The hours that you will have in making them and the cost of materials (about $50), you will have to begin to weigh that against the cost that you could buy new.
Click to expand...

The first set costs some money, the next sets are much less if you do a mold of the first one. Layup is very quick at that point. Go a step further and make a die for hard plastic and the cost overall would be cheap. The trick is making something everyone will want.
 

allcarfan

The Answer Man
Founding Member
Apr 8, 2001
2,458
1
56
North Atlanta
Feb 21, 2006
#9
  • Feb 21, 2006
  • #9
68converted said:
The first set costs some money, the next sets are much less if you do a mold of the first one. Layup is very quick at that point. Go a step further and make a die for hard plastic and the cost overall would be cheap. The trick is making something everyone will want.
Click to expand...


my $.02....id still buy them from a vendor....peace of mind
 

68converted

Member
Nov 19, 2003
772
0
16
Colorado
Feb 21, 2006
#10
  • Feb 21, 2006
  • #10
allcarfan said:
my $.02....id still buy them from a vendor....peace of mind
Click to expand...

I definitely know what your sayin'... but "iskwezm" has done some pretty slick stuff. I for one would have wanted to put 6's in my molded kicks but 5 1/2's were all that would fit, and the angle is all messed up. If my console works out ok, I will most likely make some new kick panels to match. ??? No reason not to improve on a good idea. Squeeze all you can my friend.
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Feb 21, 2006
#11
  • Feb 21, 2006
  • #11
allcarfan said:
kick panels with speakers in them? I dont know about the market for them, but they have been around for years and years. The hours that you will have in making them and the cost of materials (about $50), you will have to begin to weigh that against the cost that you could buy new.
Click to expand...
I understand what your saying about cost to profit there, but until you buy a set of the ABS panels, you dont know how they dont fit, sound like crap and the "premiuim" speakers they sell for a extra $100 bucks, cost me about $35 bucks. I fugure i can make a panel that will have "some" staging instead of the speaker facing your ankles and also use a better speaker....since i buy from a distributor, i get them WAAAAYYYYY cheaper then most people can buy them.

Oh, im not looking to make it rich, just make a better a product and a little money to cover cost and time.
 

allcarfan

The Answer Man
Founding Member
Apr 8, 2001
2,458
1
56
North Atlanta
Feb 22, 2006
#12
  • Feb 22, 2006
  • #12
just be careful if you start making stuff and sell it or even THINK about selling it here. The stangnet Nazi patrol will zap it in a minute and you will get some nasty PMs. There is always someone that gets a bug up there butt when someone tries to help others out.

Good luck with your project...post pics!
 

iskwezm

10 Year Member
May 24, 2005
4,159
20
79
Rowland Heights,California
Feb 22, 2006
#13
  • Feb 22, 2006
  • #13
allcarfan said:
just be careful if you start making stuff and sell it or even THINK about selling it here. The stangnet Nazi patrol will zap it in a minute and you will get some nasty PMs. There is always someone that gets a bug up there butt when someone tries to help others out.

Good luck with your project...post pics!
Click to expand...
I didnt say i was gonna sell it here but if somebody was interested when im done *cough,cough* then i might know where to get some
 
You must log in or register to reply here.

Similar threads

A
79 mustang pace car spoiler.
  • Anglosaxon83
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
270
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 21, 2026
Anglosaxon83
A
T
For Sale 20 year collection of rare 67-70 mustang parts.
  • truss1166
  • Jun 4, 2025
  • Classic Mustangs For Sale
Replies
0
Views
426
Classic Mustangs For Sale Jun 4, 2025
truss1166
T
Repainting whole vehicle
  • fredpinto
  • Oct 18, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
142
1965 - 1973 Classic Mustangs -General/Talk- Oct 28, 2026
Noobz347
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
388
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
S
Progress Thread slow&fast's 2000 GT - Suspension Upgrades
  • slow&fast
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
30
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Nov 9, 2026
Warhorse Racing
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?