World's Quickest And Fastest Kennebell Sbf Mustang Part 2

wp331 · May 6, 2014

Bremerton raceway in Washington state

wp331 · May 7, 2014

http://i964.photobucket.com/albums/ae128/walterkristina/IMG_20140506_201353_798.jpg
Here is a look at the time slip.

Killa · May 7, 2014

do you have under hood pic ?

Bullitt347 · May 7, 2014

Killa said:
do you have under hood pic ?

Go back to 2nd post on this thread and click on the link to the original thread.....it has all of the underhood pics of the whole process.

92rohcp · May 7, 2014

wp331 said:
Boost keeps building up to 19.9. No drop off at all. it is a 7.8 inch crank pulley and 2.75 inch blower pulley. Thanks for the props! The change in cubic inches and compression has been a radical success.... great demonstration of how boost doesn't equal power. We are spinning the blower at the same speed, using the same cam, heads, intake, and exhaust, seeing 3 psi less boost and making 275 more hp!

Hi Walter, very impressed with your success and even more impressed that the 2.8L has no boost loss. What timing can you run with the higher compression.

wp331 · May 7, 2014

So far 26 degrees on c 16. Thanks for the kind words!

wp331 · Jun 16, 2014

Took Twisted, my kennebell powered sbf fox convertible back out to bremerton raceway for another outlaw 8.5 race. We had a best of 3 final. In the third round I ran my quickest 1/8 Et of 5.769. The video's can show how hard it is to get a small tire car down the track sometimes!

View: https://www.youtube.com/watch?v=IjLmlla2FhU

View: https://www.youtube.com/watch?v=BDsvO-Y8w80

View: https://www.youtube.com/watch?v=4QHKpOlbnFc

wp331 · Nov 17, 2014

Streetcar Nationals here we come! Wish us luck, we are taking the convert to Vegas to race in 8.5 outlaw this weekend. We have made a couple of changes late in the season the yeilded interesting results. We shortened the exhaust from a 3.5 inch x pipe with dumps in front of the rear axle to strait pipes to bullet mufflers and dumps off each header collector. This change maxed my 120lb injectors out to 100% duty cylce for almost the entire 1/8 mile run. We now have 220lb injectors in and anticipate a healthy jump in et...pics and video to follow!

Noobz347 · Nov 24, 2017

....and? What happened next?

Bullitt347 · Nov 24, 2017

What happened next? After 3 years now you are asking? I could write a book on what happened next and then what happened after that and on and on. Lol Basically Walters car got a custom Hogans intake manifold and a much larger 3.6L Kenne Bell and is now making 35ish psi of boost. And he switched over to running straight Methanol. No more I/C. He has since gone as quick as 5.22 in the 1/8 mile.
And then of course I built my own version of his set-up and have gone as quick as 5.33 in the 1/8 mile with only 21 psi of boost with the much smaller 2.8L Kenne Bell. Those are the cliff notes.

General karthief · Nov 24, 2017

Bullitt347 · Nov 24, 2017

karthief said:

Walters 377 cid 8.2" deck with 3.6L Kenne Bell set up with custom Hogans intake for 2 fuel injectors per cyl.

T-body to that beast!

Noobz347 · Nov 24, 2017

General karthief · Nov 24, 2017

plus 10 more

World's Quickest And Fastest Kennebell Sbf Mustang Part 2

wp331

Member

wp331

Member

Killa

Active Member

Bullitt347

I have been doing it wrong this whole time

92rohcp

Member

wp331

Member

wp331

Member

wp331

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Bullitt347

I have been doing it wrong this whole time

General karthief

wonder how much it would cost to ship you a pair

Bullitt347

I have been doing it wrong this whole time

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

General karthief

wonder how much it would cost to ship you a pair

Similar threads

World's Quickest And Fastest Kennebell Sbf Mustang Part 2

Member

Member

Active Member

I have been doing it wrong this whole time

Member

Member

Member

Member

Stangnet Facilities Maint Tech... Er... Janitor

I have been doing it wrong this whole time

wonder how much it would cost to ship you a pair

I have been doing it wrong this whole time

Stangnet Facilities Maint Tech... Er... Janitor

wonder how much it would cost to ship you a pair

Similar threads

Privacy & Transparency

Privacy & Transparency