Worth doing, not even really a mod!

M

Makdaddymac

New Member

May 28, 2005

323

1

0

orlando

Mar 31, 2008

#1

• Mar 31, 2008

• #1

http://i164.photobucket.com/albums/u11/86gtstang/stangnetpics002.jpg
after looking at the filter on the oil fill tube. i realized how cheaper it is to do sucha thing versus buying a 20.00 cap with the filter. so tommorow im going to buy a small breather ad a plug! lol. i always liked how the extra filter makes the car look like it belongs to a car enthusiast rather than just your runof the mill gas and drive owner...is this worth my time and 8-10.00! i mean i was gonna spend 20 plus shipping for a breather twist on cap!!! any harm when doing this??

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Mar 31, 2008

#2

• Mar 31, 2008

• #2

If you're planning on running an open breather, you need to eliminate your PCV, or you're gonna have one hell of a vacuum leak through the crankcase. Just an FYI...

 

M

Makdaddymac

New Member

May 28, 2005

323

1

0

orlando

Mar 31, 2008

#3

• Mar 31, 2008

• #3

ok,lol, this is why i ask these ?'s.......it doesnt seem from the pic that anything was done but a filter and plug? what else needs to be done!

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Mar 31, 2008

#4

• Mar 31, 2008

• #4

Since you can't see the PCV on that engine, you have to assume it's been eliminated. That really doesn't involve much, except capping the vacuum port that would run to your PCV valve on the upper plenum, and either finding a plug that would fit in place of the PCV valve on the lower, or leaving it in place and putting a cap on it, so that it doesn't allow any sort of debris to enter the engine.

 

M

Makdaddymac

New Member

May 28, 2005

323

1

0

orlando

Mar 31, 2008

#5

• Mar 31, 2008

• #5

ok so all i have to do is cap off the part on the egr space/tb. and cap off another thing on the lower intake? what is running into it???

 

M

mavmavv

New Member

Nov 21, 2007

185

0

0

Mar 31, 2008

#6

• Mar 31, 2008

• #6

So youre basically doing that for the looks? What you are doing is evaporating vapors into the atmosphere instead of recirculating them back into the engine. Not exactly good for the environment.

Any real car enthusiast would just look at you and question why you have a random breather on your motor.

 

MAC'n89Blckstng

Active Member

Jun 11, 2003

1,012

3

36

NJ

Mar 31, 2008

#7

• Mar 31, 2008

• #7

Looks bad imo. Now you have this gooseneck sticking off the side of your throttle body. The breather tube looks better in my opinion.

 

M

Makdaddymac

New Member

May 28, 2005

323

1

0

orlando

Apr 3, 2008

#8

• Apr 3, 2008

• #8

so a breather cap is better?