Would appreciate some speedcal help

CobraRed_96_GT · Oct 8, 2006

I'm stuck in installing my speed cal for a 96 GT
on dallas mustang's site's directions http://www.dallasmustang.com/page/speedcal.inst.php
step 13 shows the round connector from the car, i can't seem to find this. I have the speedcal round connector ready but cant find where to connect it. Also i have the VSS connector thats more squarish plugged right into the tranny and the VSS connector that was on the tranny stock just hanging. is this how it's supposed to be?
here are some poor pictures the white and gray wires leads to the circle connectorfrom the speedcal i was talking about, and the blue and green to the VSS thats from the speedcal also. any help would be appreciated

CobraRed_96_GT · Oct 8, 2006

I found a connector further up the tranny towards the car with the right color wires but it's a squarish design and wont even closly fit with the round connector

CobraRed_96_GT · Oct 8, 2006

merc123 · Oct 9, 2006

I'll climb under mine tomorrow to see. I did it about a year ago and can't remember exactly. It was a PITA to find the right connector though.

COramprat · Oct 9, 2006

I can't remember either. Mine is in the shop with a tranny rebuild but if you don't have an answer by the end of the week I'll check mine out.

CobraRed_96_GT · Oct 9, 2006

thanks guys, it'd help alot. Right now i just have it installed with the connectors dangling zip-tied. Getting tired of the odometer having a field day

CobraRed_96_GT · Oct 9, 2006

i recieved this from DM. I did buy it used.
Did you purchase the speedcal new? It looks like the speedcal has already been installed on something.

Here’s how it works…

Unplug the vss sensor plug from the vss. Remove the wires from that plug and re-install them into the round plug with the black loop supplied with the speedcal. Then, plug the blue and green wires in to the original vss plug and plug it back into the vss. The black plug with the black loop and now the original wires plugs into the round plug of the speedcal.

Archie
sounds simple, but does anyone really get this? What do i plug the round connector into? Sounds like he's reffering to haveing 2

CobraRed_96_GT · Oct 9, 2006

i figured it out guys, if you look at the DM pic at http://www.dallasmustang.com/page/products.php?product=9910 you'll see 2 round connectors w/ loops. I was sent one of those w/ the other being a square VSS connector -

Would appreciate some speedcal help

CobraRed_96_GT

Active Member

Attachments

CobraRed_96_GT

Active Member

CobraRed_96_GT

Active Member

merc123

Active Member

COramprat

...I can take it. I think.

CobraRed_96_GT

Active Member

CobraRed_96_GT

Active Member

CobraRed_96_GT

Active Member

Similar threads

Would appreciate some speedcal help

Active Member

Attachments

Active Member

Active Member

Active Member

...I can take it. I think.

Active Member

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency