• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Would this alarm system work?

  • Thread starter Thread starter Milenko
  • Start date Start date Jan 2, 2004

Milenko

Skid Mark Layer...only not fro
Founding Member
Nov 5, 2001
462
1
19
Boston, MA
Jan 2, 2004
#1
  • Jan 2, 2004
  • #1
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33721&item=2452029560

I want a keyless entry system for my car, and this one comes with an alarm...

Would it work for my 96 GT?.. It says it works on Mustangs but I don't know..
 
0

02gt714

New Member
Jun 19, 2003
21
0
0
Frederick, MD
Jan 2, 2004
#2
  • Jan 2, 2004
  • #2
for the most part, any alarm system will do. just be careful. dont believe everything u read about wire colors. i did my own alarm system install, in 2 mustangs. an 03, and mine, an 02. it was a PITA. when patch into the wires for the doors, and the trunk, u must put in diodes. the computer shuts itself off after about 30min to save battery, and sends a false ground to the alarm system to think the doors are opened. what i did, i took off the door panels and patched in right at the door sensor w/ the alarm cable (extended) w/ a diode in each door, and for the trunk. i also patched into the power locks at the door also. it made things a hell of alot easier rather than being smashed under the dash. running a lil wire imo is easier the trying to find the right wire by the computer. i put in 3 diodes, 1 for each door, and 1 for the trunk. then the relay for the remote trunk release, i patched into the button wire in the glove box. i belive it a positive pulse. if you were to decide, try crutchfield.com . they have harnesses for the ignition thats almost plug and play for the starter kill, power, etc. for the alarms they sell. if they dont have it listed, say u want the one that also fits the 97+ F150. once i did these things, ive never had a problem w/ the alarm. let me know if there is anything else about the alarms i might be able to help u with.
 
You must log in or register to reply here.

Similar threads

A
Fuel Capable fuel system for +600hp
  • Avia.tuned
  • Feb 24, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
84
SN95 4.6L Mustang Tech Feb 24, 2026
squeak93
S
1990 foxbody 5.0 fuel system.
  • staceyj
  • Nov 28, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
351
Fox 5.0 Mustang Tech Nov 28, 2025
Mustang5L5
Resolved Holley terminator integration into CCRM
  • BrandonMP
  • Feb 25, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
206
SN95 4.6L Mustang Tech Feb 27, 2026
BrandonMP
B
Airaid reduction sleeve?
  • BriansNSane
  • Dec 20, 2025
  • SN95 4.6L Mustang Tech
Replies
0
Views
133
SN95 4.6L Mustang Tech Dec 20, 2025
BriansNSane
B
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?