Thanks! Perhaps a caliper rebuild is in order as well then. It's been sitting for 10 years now.As said, those are 99-04 GT/V6 calipers and rotors. Cant tell the brake lines from that angle.
Rear setup is standard 94-04 GT/V6 rear brakes as well.
The part number on the spindle indicates those are 96-04 spindles.
It’s a decent brake setup. Good stopping power and fits in smaller rims. Downside is the front calipers are notorious for dragging/sticking.
Thanks, I'll take that into consideration. The cobra brakes just bolt right up to my spindles?
I'll send a pic after work today, thanks!Correct. Need rotors, loaded calipers and possibly lines depending on what you already have.
Would just need to take a look at what MC you have. A 93 cobra MC would be idea for 99-04 cobra fronts
And a 93 cobra booster or sn95 booster.Correct. Need rotors, loaded calipers and possibly lines depending on what you already have.
Would just need to take a look at what MC you have. A 93 cobra MC would be idea for 99-04 cobra fronts
And a 93 cobra booster or sn95 booster.