Help me choose my H/C/I setup ....

[Marlboro_Man]

Not for sure if this should be in tech or talk but i'll give it a try here.

Freshly rebuilt '87 302 block
E303 cam
All the typical boltons (see sig)

What i was thinking is to get some AFR 165 heads and hardened pushrods.

Either the BBK ssi upper and lower intake with a 70mm tb OR the edelbrock performer rpm2 upper and lower w/70mm tb I can't decide. Any suggestions?

Also what rocker to go with? 1.6/1.7? brand?

I would like to make a nice streetable mid 11 low 12 car on motor.

Any suggestions welcome, I'm open to ideas from you guys since y'all know more than i do on this subject.:SNSign:

 

[IntenseBlue]

Edelbrock Performer, AFR 165s.

 

[Lyncher]

..I dont think your getting high 11's n/a without some heavy suspension mods but..

I would go with afr 165's
and give the new BBk SSi intake a shot..it looks nice and I read on the 94-95 section that some1 gained 7hp switching to a bbk intake from a tfs!

and I would stay stick the the 1.6 rrs