hey i was wanting to see some pics of the interrior gauges in 99+ mustang gt's that are lite up at night or glow...planning on swapping the gauges sometime soon so if yall could help me out id appreciate it!
interrior dash gauges
- Thread starter Q's Stang
- Start date
-
Sponsors (?)
neoclasiccl
Founding Member
These are the best but are also expensive. I had them on my old 2002 GT and loved em.
http://www.nrauto.com/gauge_body.asp?id=237
http://www.nrauto.com/gauge_body.asp?id=237
You mean gauge faces??
These are what i have. Sorry they are not my own pics. These belong to Dmarco 4u to give him credit.
I got these on Ebay, cost me $27!!!
Only changes i made were that i cut out the white areas for the warning lights and turn signals. I did not like those in white. They were easily cut away and look much better.
I get tons of compliments on them.
These are what i have. Sorry they are not my own pics. These belong to Dmarco 4u to give him credit.
I got these on Ebay, cost me $27!!!
Only changes i made were that i cut out the white areas for the warning lights and turn signals. I did not like those in white. They were easily cut away and look much better.
I get tons of compliments on them.
yea...gauge kits or whatever...are there any gauge faces that have like a red or blue illumination or do they all just glow?
hmm...27 bucks for a nice kit sounds real tempting! anybody have any pics of it with it switched to blue?
Q's Stang said:
i think they were blue when i took that picture on my page, but the camera makes it look funny
http://www.cardomain.com/id/beafra8d has both pics, installation tips and such. the seller on ebay was g4parts i think, and the picture in the auction was of reverse glow gauges, even though that isnt what the item was.
Yeah those were blue the ones i posted. I think i'm confused on who's pic they are exactly.
This is who sells em
http://stores.ebay.com/g4racing-dot-com_W0QQsspagenameZl2QQtZkm
Here's an auction for one of the exact same gauges we have. The picture looks different but they are the same
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&tc=photo&item=7914060658&category=46100
This is who sells em
http://stores.ebay.com/g4racing-dot-com_W0QQsspagenameZl2QQtZkm
Here's an auction for one of the exact same gauges we have. The picture looks different but they are the same
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&tc=photo&item=7914060658&category=46100
White Stang
Member
Mach1Run
New Member
myponyrocks
I have more billet on the Stang than most women ha
- Apr 18, 2004
- 1,219
- 0
- 37
I got the insert from mwspeedworld I think, but its a UPR product. After cutting apart the clustster, inserting that, and gluing it back together, sometimes I wonder if it would have been worth the extra cash to just buy one of the (35th? anniversery) premade clusters.
Looks killer though. Mine looks almost identical to the setup above. But you could still check it out, my links in my sig.
Looks killer though. Mine looks almost identical to the setup above. But you could still check it out, my links in my sig.
KaPPaBaLL said:anyone got a how-to or instruction to taking out the gauge cluster? just wondering before i go do trial and error.
take off the headlight knob by using a little screwdriver and prying up the little piece of metal in the slot. takes a while. two screws on the top of the bezel piece in front of the cluster. then just pull, lots of little fasteners holding it on. four screws on each corner hold the cluster in place. two electrical connectors are attached in back, press down on a little tab and disconnect them. when the gauge pod is out, there are 8 screws that hold the glass down on the gauges. all of the screws are torx bits, but can use a small socket (don't remember the size) because they are hex shaped.
or just go here and read this because it's in better english and has pictures.
http://www.mustangworld.com/ourpics/fcar/whtf1.htm
mity2
I like Pro3 and all I got was this crappy CT.
Similar threads
