I think I just came or maybe thats just Ectoplasm all over the place
http://videos.streetfire.net/video/2007-Shelby-GT500-Twin-Turbo_158452.htm
http://videos.streetfire.net/video/2007-Shelby-GT500-Twin-Turbo_158452.htm
North East SSoM Members!!!
- Thread starter whitehorseupnorth
- Start date
started the stang today. Sounds and feels good.
Turn signals not working but the hazards do. Going to have to figure that out. Probably has to do with there being a much lighter load with the LEDs in there. I think its a common problem and you have to get a different blinker to plug in the fuse area.
Notched the underside of the hood so it will clear the intake.
Checked the local Cumberland Farms and their pumps still say 93 octane
. That is where I normally go anyways so I hope it stays that way. I think its the same price or extremely close to the 2 stations that are within 1000 feet. The other 2 only have 91 octane. I do know that Irving a couple of miles away also has 91
.
Turn signals not working but the hazards do. Going to have to figure that out. Probably has to do with there being a much lighter load with the LEDs in there. I think its a common problem and you have to get a different blinker to plug in the fuse area.
Notched the underside of the hood so it will clear the intake.
Checked the local Cumberland Farms and their pumps still say 93 octane
. That is where I normally go anyways so I hope it stays that way. I think its the same price or extremely close to the 2 stations that are within 1000 feet. The other 2 only have 91 octane. I do know that Irving a couple of miles away also has 91 .
whats up guys. never thought to check the regionals for local stangers. moved here from california last year to portsmouth, and now to york...
i need to have some parts installed. the only place ive looked at that sounded right is performance dyno in concord. do you guys know any competent shops that could handle installing and aligning my c/c plates, subframes, LCAs, shocks and struts?
much appreciated, ill be in touch
i need to have some parts installed. the only place ive looked at that sounded right is performance dyno in concord. do you guys know any competent shops that could handle installing and aligning my c/c plates, subframes, LCAs, shocks and struts?
much appreciated, ill be in touch
cold96snake
20+ Year Stangneter 
whats up guys. never thought to check the regionals for local stangers. moved here from california last year to portsmouth, and now to york...
i need to have some parts installed. the only place ive looked at that sounded right is performance dyno in concord. do you guys know any competent shops that could handle installing and aligning my c/c plates, subframes, LCAs, shocks and struts?
much appreciated, ill be in touch
Hey whats up. Ive delt with Performance Dyno before they did a chip for one of my previous mustangs and I plan on going back to them for this one as well.
Im not sure about installing the sub frames b/c I dont think they do welding but they can do everything else. Our friend chris works at a tint shop in Portland and they do installs as well performance type of stuff. Ive know chris for quite a few years he built a sick turbo fox and hes done a lot of work on my Mustangs, Gears, Supercharger installs all that type of stuff so he does good work. Give them a call at 797-8486 and ask for chris. Tell him Travis said to call you off stangnet just ask him about what you want installed and for a price he can give you a general idea. Im having mine brought in there shortly to have a cam/springs and intake installed along with a few other things.
heres a Whipple charged Shelby at the track. I think the best run is at the end after some gay music and minor montage.
http://videos.streetfire.net/video/Shelby-GT-500-with-34-whipple-supercharger---few_144561.htm
http://videos.streetfire.net/video/Shelby-GT-500-with-34-whipple-supercharger---few_144561.htm
no I didnt go, I planned on it but I felt like crap later on in the day and just didnt feel up to driving to N.H. Maybe on weds but Id just like to get all the new parts put on.
Bonny Eagle Car show is coming up, we should hang out there for the day.
Similar threads
