Post pics of how your foxbody currently sits
- Thread starter Mustangfan
- Start date
Way2QWK
Member
Jredline1984
Member
Make your own thread pleaseJoined awhile ago, haven't posted much. Here is my latest project, a 1980 Cobra.
New fender and air dam on:
I love 4 eyes and want to see more of this car lolAttachments
Sharad
ALWAYS choose the V over the P!!! Wait... what?
I was worried about that too, because mine's only on 275s, but they put this strap around my chute mount and strapped the back end down about half an inch or more. It didn't spin at all! It's still pretty terrifying to watch how much the car moves with it anchored in 6 places.
Jredline1984
Member
Make your own thread please
Lol, I will try to find some time to make one in the near future. Haven't done much to it since that pic but I can upload some pics of the 351C I'm building for it. Been busy restoring that F150 in the corner of the pic.
stangman11
Member
Cory Berg
Active Member
This thread has made me rather envious of some people's Mustang's. Hopefully mine will be that awesome at some point. As of now, I'm at the starting point as I just bought it only two weeks ago.
View attachment 137962
Untitled by jmbohizic, on Flickr
View attachment 137964
Untitled by jmbohizic, on Flickr
Awaiting the removal of the transmission. H-pipe, starter, and driveshaft are all out and pretty much all else in unbolted except the rear mount, the bellhousing, and the torque converter. Hopefully that little turd comes out and in goes the low mileage AOD and 2500 stall converter next weekend. Throughout the week I'll be replacing the Quarter mindow mightmare too. Wish me luck folks!
View attachment 137962
Untitled by jmbohizic, on Flickr
View attachment 137964
Untitled by jmbohizic, on Flickr
Awaiting the removal of the transmission. H-pipe, starter, and driveshaft are all out and pretty much all else in unbolted except the rear mount, the bellhousing, and the torque converter. Hopefully that little turd comes out and in goes the low mileage AOD and 2500 stall converter next weekend. Throughout the week I'll be replacing the Quarter mindow mightmare too. Wish me luck folks!
93project
Active Member
Nice! Too bad the magazine has shifted most of its focus to s197... I love seeing a nice fox in there each month but not worth the subscription. Good job getting your baby in that mag!
Attachments
Cory Berg
Active Member
Twin44KoH said:This thread has made me rather envious of some people's Mustang's. Hopefully mine will be that awesome at some point. As of now, I'm at the starting point as I just bought it only two weeks ago.[\Quote]
What rims are those? I really like them
gearheadboy
15 Year Member
Jredline1984
Member
She is a '79 but has the grill from a 77 and the rest of the body is off of a 76 so good eye!
I love Clevelands and the rest of the 335 series engine family which is why I stuck with the 351M in the truck. I used the 2V heads from the Mustang's cleveland after I sourced some 4V heads.
I do have to say I love everyone's stangs. Had an 88GT that I converted to carb years ago and then sold that after I purchased a '94 SVT Cobra. I miss that car.
David Pepiton
Active Member
5 lug stuff... almost there:
5 months ago:
wife bought me new head lights and I hit the car with some rubbing compound and polishing compound though it was about 2 weeds ago and its not looking nearly as it did when polished it.
5 months ago:
wife bought me new head lights and I hit the car with some rubbing compound and polishing compound though it was about 2 weeds ago and its not looking nearly as it did when polished it.
Attachments
93project
Active Member
Nice! Oreilly brake fluid and masterpro gear lube! Don't forget to buy friction modifier. As far as i know, The only oil we(Oreilly) sell that has modifier in it is royal purple.5 lug stuff... almost there:
5 months ago:
wife bought me new head lights and I hit the car with some rubbing compound and polishing compound though it was about 2 weeds ago and its not looking nearly as it did when polished it.
