Hi, help me with these please. I got a 302 engine from an explorer it is a 5.0 roller engine, I'm planning on rebuilding it and put it into a 66 mustang, I got a Ford E303 roller cam, a pair of full stock gt40 iron heads (Non P), I have the set of new hydraulic roller lifters and Edelbrock rpm, I have been reading that in order to have this setup i need to change the valve springs and the roller rocker arms and maybe the pushrods.
I don't know what valve springs to choose, either what roller rocker arms if 1.7 or 1.6 but I think 1.6 causes less stress and something thing that I'm missing are the pistons and rings so could you help me deciding what pistons, if the 1.6 roller rocker arms are fine and what valve springs to choose please
I don't know what valve springs to choose, either what roller rocker arms if 1.7 or 1.6 but I think 1.6 causes less stress and something thing that I'm missing are the pistons and rings so could you help me deciding what pistons, if the 1.6 roller rocker arms are fine and what valve springs to choose please
Last edited: