Search results

  1. 89gt89

    Brakes The Ultimate 4-lug/5-lug Brake Conversion/upgrade Thread

    I just got my order today from LMR for a 5 lug 93 Cobra wheel. It'll fit perfect with the following SN95 combo: 94 - 98 stock length axles tucked into a 88 Turbo Coupe 8.8 housing riding on eibach Sportline springs. There's about 1/8 - 1/4 between the lip of the rim and the outside of your rear...
  2. 89gt89

    Brakes The Ultimate 4-lug/5-lug Brake Conversion/upgrade Thread

    I'd like to see how they fit w/sn95 length rear axles as well. Does one need to roll the fender?
  3. 89gt89

    93 Cobra brake booster install

    Removing the d/s seat is great advice. I had no prob slipping the brake booster in on my 91 w/o bossing out the mounting holes and pounding the strut tower. I pulled as much wiring and vaccum lines out of the way.
  4. 89gt89

    The thread of the nicest FOXES!

    My Foxe's. 91 coupe and 86 Saleen#24
  5. 89gt89

    How to re-install a t5 cover plate??

    Found my answer below. Awesome pic. Thanks V8only! http://www.stangnet.com/mustang-forums/8198593-post8.html
  6. 89gt89

    How to re-install a t5 cover plate??

    it's definitely the shift forks and keys. I the gears are set to neutral.
  7. 89gt89

    How to re-install a t5 cover plate??

    I just bought a t5 and I wanted to make sure the gears look ok. They look great. However, I removed the cover plate and can't find out how to put it back on right...I can get it back on but I can't shift thru the gears. Any ideas? Thanks
  8. 89gt89

    C&L 73mm MAF plus 19lb Sensor

    SOLD. Thanks
  9. 89gt89

    Accufab Adjustable Fuel Pressure Regulator

    Nice FPR. 60- Free shipping from 98012
  10. 89gt89

    79 - 93 Smog Pump Delete

    I switched to a shorter belt rather than use the delete. 60- Free shipping via USPS from 98012
  11. 89gt89

    C&L 73mm MAF plus 19lb Sensor

    C&L 73mm 19lb Meter. 90- Free shipping via USPS from 98012
  12. 89gt89

    Ranger 2.3 5 speed input shaft Q

    I researched the compatablity of the 95 3.8 t5 and the gearing is nearly identical to the 85 - 89 5.0 t5's. The difference being the length of the input shaft. I got the transmission for free so I'm gonna keep it. I searched a couple of Ranger mod sites and it appears that the stock 5 speed...
  13. 89gt89

    Ranger 2.3 5 speed input shaft Q

    Hi Everyone, I just bought a 95 3.8 T5 that has less than 200 miles on a complete rebuild. I understand that a new input shaft is required to fit my 89 5.0. Either a 5.0 or a 2.3 shaft will work with the exception of a throw out bearing for the 4cyl unit. Does anyone know if an input shaft...
  14. 89gt89

    Injector Harness Rehab LSC, Cougar, T-Bird, 5.0

    Hi Everyone, I'm not sure if this topic has been discussed but here we go. I have an 86 Saleen that had a very tired injector harness. Cracked wire, exposed copper, disintegrated looms, busted connectors etc. I went to the local Pull A Part to see what I could find. 5.0 Mustangs are few...
  15. 89gt89

    Sn95 5 lug conversion on 89 brake problems help

    Have you tried to bleed the lines again? I did the same conversion and the frond pads dragged horribly. The 2nd bleed took care of all probs.
  16. 89gt89

    4 wheel disc questions

    Lincoln VII/SVO propvalve's don't need a 3-2 port conversion. Makes for a clean install once gutted and plugged.
  17. 89gt89

    Quick E-brake question

    Looks like you're rolling a 91 so the 93 Cobra cable's won't work. However, FMS make a set of cables that will work perfect. I forget the part# but have a set on my 91. Same rear setup that you have. Search the swap threads. All the #'s are there.
  18. 89gt89

    4 wheel disc questions

    I'm rolling 01 pbr's in front w/01 rear's. Northracecar brackets w/stock length 5 lug axles. I have used th e SVO MC on all 3 conversions I have done and love it. You have 2 reservoirs which can be a plus. I gutted a Fairmont propvalve and plugged it. The SVO/Lincoln VII/Fairmont prop...
  19. 89gt89

    Interior Install help

    Take your time, be careful w/the mounting tabs on your pillar trim, same for the 2 tabs on your 1/4 panel trim, and don't let kitty help. <a href="http://s242.photobucket.com/albums/ff77/89gt89/?action=view&current=IMG_1349.jpg" target="_blank"><img...