Search results

  1. 91notch5.0

    1 Piece Headlight Pictures And Opinions

    freshly painted strawberry notch, need new headlights. WAY TO MANY OPTIONS! thx!!
  2. 91notch5.0

    edelbrock rpm II or GT40 intake on modded 302??HELP!!!

    i have been told that my tubular gt40 is holding me back from making the power i should. i just got a rpm II but i am hesitant to change. should i change?? car currently has 280hp and 325tq at the wheels which seems odd to me.:shrug:
  3. 91notch5.0

    C&L vs. Pro M mass air

    i have the 73mm c&l with the rubber tube that goes to the intake. the car is tuned for this setup right now. i will be adding some kind of a power pipe if i keep this setup. i just got a 75mm pro m meter with the aluminum tube that goes to the intake. is it worth switching? has...
  4. 91notch5.0

    t-5 rebuild options!?!?:?

    my car is runnung excellent but the t5 is almost gone. crunches, gets stuck in gears ect. another trans is not an option at this time. any success with rebuild kits. either the ford kit or a kit with better gears ect..
  5. 91notch5.0

    any experience with the edelbrock rpm 2??

    my setup is in the sig. i have been told that if i change my real gt40 intake and put on the delbrock rpm 2 i would gain 20 hp to the rear tires with no loss of torque. currently i have 298 hp and 325 tq at the rear wheels. 20 hp sounds way to good to be true to me. also....would i be...
  6. 91notch5.0

    dyno numbers for my new 306

    look in the sig for setup. 278 hp and 324 tq at the rear wheels. doing the -15%math i got 320hp @ 372 tq at the flywheel. the is run on 93 octane...
  7. 91notch5.0

    recommended rear shocks for a better launch than stock???

    my stock rear shocks are toast. i figure that if i'm getting new shocks i want the car to launch better as well. what shocks are recommended for a street car that will go to the track two times per summer.
  8. 91notch5.0

    MSD iginition-how much of a performance increase?

    my mods are in the sig, i will get the car tuned.
  9. 91notch5.0

    what will my 1/4 mile time be?

    i will get the car tuned first.
  10. 91notch5.0

    convert to 5 lug rear disc brakes????

    i already have a 5 lug car using the ranger axle & drum trick. now i want to change the rear to disc brakes. i was told 94 mustang brakets, caliper, rotors & pads.......what else and is it that easy??????
  11. 91notch5.0

    efi 302/306 1/4 mile times and setup

    post your times and setup.
  12. 91notch5.0

    how do i put on my new 1.6 roller rockers?

    1) what torque do the studs need to be? 2)how do i know how far to tighten the nut/allen key things that hold them on? mid to high 12's 306 hopefully coming soon......
  13. 91notch5.0

    egr eliminator....does it work

    on ebay i see egr a eliminater piece. it is supposed to trick the computer into thinking the egr is hooked up. does anyone have this on a mostly stock mass air equipped mustang. i'd like to not buy a 70mm egr spacer and just get rid of it instead.
  14. 91notch5.0

    longtubes Vs. ground clearance

    do they hang lower than a shortie equipped exhaust? i plan on lowering my car a few inches and just want to see if i should be concerned.
  15. 91notch5.0

    summit longtube headers!!

    has anyone bought these for their fox. they are less than $100. i want them if they are decent.
  16. 91notch5.0

    302 - 351 swap. R U HAPPY ? ! ! ?

    i can do a 302 or 351. i have everything together to do either except a gt40 351 lower. this is just a fun car that will go to the track 2 times per summer. i just don't see any reason not to do it. my plans on either: long tubes 3.73 24 # windsor jr heads gt40 intake mass...
  17. 91notch5.0

    retrofit hyd/roller lifter in 351w ????

    what holds then down? i'm guessing the intake?
  18. 91notch5.0

    306 are you happy?

    i am going to a 306 soon. i'd like to know if you wish you went with more cubes, different setup or just general stuff like any regrets. setup and times, i'd like to make it into the 12's
  19. 91notch5.0

    when is it ok to change to 24# injectors?

    10-1 306 winsor jr heads gt-40 intake haven't picked a cam, throttle body or mass air yet. do i need to stay with 19s or change to 24s??