Search results

  1. two_stangs

    Found Coolant Leak...Still Need Help!

    :shrug: I found where I am leaking coolant. It is from the Firewall out of a rubber looking circle on the passanger side. It is below the heater core hoses and above the H pipe next to the Transmission dipstick path. What is this plastic Rubber looking Circle? Nothing goes into it. Is...
  2. two_stangs

    Leaking Coolant...Help!

    I am now leaking coolant onto my K member on the passanger side. I checked the upper heater core hoses and they are not leaking. I can't see anyhting that is leaking from on top of the engine. Also theres no coolant on the inside of the passanger car which would suggest the heater core...
  3. two_stangs

    Car smeels like Pan Cake Syrup...Heater core problems.

    Car smells like pan cake syrup when turn the heater core on. This and the click, pop, hiss when I turn it off is a sign of the Heater core going out right??? But I live in San Diego and am moving to Arizona. So I really don't need HEAT in these climates. Nor have I used it until I read a...
  4. two_stangs

    Lug Nuts and Wheel Locks..??

    Where can I get a good set? They have all the locking lugnuts in hollow and black / chrome / blue / etc. fot imports but where can I find a good set of Lightweight lugnuts???? The set I have does have a lock on one of each wheel but they weigh a ton and are very common. I'm looking for a set...
  5. two_stangs

    Moving to Arizona...Cooling suggestions.

    I have a 1990 5.0 GT hatch. With basic mods for right now. I/H/E and a 3 row copper radiator. I will be adding new GT40 Heads and Ford Racing roller rockers and new Ford racing Upper and Lower intake manifold. And some pullies. And got a Ford racing Aluminum Radiator thats in my garage...
  6. two_stangs

    Would Changing Radiator Mess with Oil Pressure?

    I changed my Radiator out since it was leaking and the fluid was old. With a new 3 row and new 50/50 coolant after I reconnected tha battery it seemed my oil pressure gauge would now fluctuate. It used to stick in the middle and not really move unless I hit the gas. Now it has more...
  7. two_stangs

    Help..Installing 3 row radiator.

    I do not have at least 9.6 mm of clearance on the clutch fan to the fan shroud on the bottom. Like is needed. How much is safe to cut on the rubber lower holders for the radiator?? I only have about 4mm of clearance on the bottom of the fan shroud between the fan.
  8. two_stangs

    Removing Steering Wheel in 90-93 Mustang..??

    I was wondering how easy it is to remove the steering wheel in my 1990 GT. It has the air bag. Is it an easy task? I have stripped the interior out of many cars but never one with an airbag. Any info will help. Thanks
  9. two_stangs

    When Lowering Car...Should I get shorter Endlinks?

    I was wondering if I should get shorter endlinks when I drop my car with the H&R sports?? Or should the stock length be OK?
  10. two_stangs

    Flaming River Deluxe Installation Kit for 79-93..Question.

    I did a search and did not come up with the answer I needed. I am looking into getting this kit from Flaming river. The Kit includes: +Manual R/P FR1503 +High-performance, needle bearing U-joint shaft kit...Correct manual spline, eliminates the rag joint FR1504-M +Manual tie rod ends...
  11. two_stangs

    Whats the differance bewteen 99,01 Cobras and 03,04 Cobras??

    I know the 2003 and 2004 are superchangered but are the 99,01's? On Fords SVT site it shows only a different Compression between the models. So any Info will help. I am in the Market for a new Mustang.
  12. two_stangs

    Radiator Suggestions???

    In the price range of $300 or Below. I have an automatic so it will need a trans coler. But I will be moving to Arizona and installing a B&M supercooler for the tranny once I move due to the high temps. But I've found this 3 row but I don't know if it's crap or not. It can't be REAL OEM...
  13. two_stangs

    Came up on some Trannies....What fits my 90 Mustang 302 5.0??

    I came up on a Used C4 and a C6 for free....Now what cars will these fit. I've heard the C4 will fit my 5.0....Will the C6?? What modifications would I need to do?
  14. two_stangs

    255-50-17's Should you run a different tire pressure than normal with this size?

    I was wondering. I have 17x9 rims and have 255-45-17 tires on them. Do I need to run a different tire pressure than normal?
  15. two_stangs

    Transmission Cooler....In a 90 Fox Body..Where to mount?

    I'm looking at getting a B&M Supercooler Transmission Cooler. Where should I mount it? And which size should I buy? :shrug:
  16. two_stangs

    "Flex a Lite" Fan....Good or Bad?

    I am looking for some feedback. I have heard that Electric fans do not cool as well as Stock or Flex a lite Fan. That for a modified Mustang that using the stock clutch type or the flex a lite replacement fan is the best. Is this true? Is the Flex a lite fans good or should I stay stock?
  17. two_stangs

    Stock 5.0 Radiators.?? Do the auto's have trans coolers? Any info will help.

    I need to replace my radiator. And have found many kits. But do stock autos have a trans cooler? Or can I use the 5 speed radiator with an automatic? I see lots of radiators not stating for 5 speed or auto. Adn some stating only for 5 speed or auto. Are the 5 Speed's and Auto's stock...
  18. two_stangs

    MAC Fenderwell Cold Air Intake..Install Bracket?

    In the Kit for the MAC Cold air fenderwell intake it included a bracket to mount the MAF Sensor. But in the instructions it stated this bracket was used for the short ram. Not the Fenderwell intake. My Question is: Is it still nesessary to instal this Bracket?
  19. two_stangs

    Eibach or H&R???

    I'm getting springs for my Hatch. I don't want it slammed. Just lower it a little over an inch. The choice's are: H&R sport springs Eibach Pro-Kit It has KYB GR-2 Struts And Shocks. Also Has Saleen Racecraft Quad Shocks. And AFS wheels Cobra Rims 17x8 Front and 17x9 Rear...
  20. two_stangs

    Soon will be Getting a 1994 F-150 Lightning....Please let me know some info on it.

    My Dads Retiring out east and leaving California. He will be giving me his 94 Lightning when he goes. I just wanted to know the specs on it. I found the basics like HP and Torque and curb Weight. But what rear end gears does it have? Does it have posi? What is the Tranny in it...
Top Bottom
Back
Forums
Menu