Search results

  1. Bramcavender

    SN95 Not Sure About 94 Cobra

    Well I've hit the welcome wagon now I'll post up here, had a mustang years ago, then owned a 01 lightning for a few years, sold it and bought a 94 cobra that needs let's say lots of work. My problem other the bodywork is do I keep it based around the 5.0 or build the 351 I have. Any thoughts?
  2. Bramcavender

    Outta The Lightning Into A Cobra!

    Well it's been a few years but I sold my lightning, which I do miss, and now have a 94 cobra that's gonna need some tlc, good to be back!
  3. Bramcavender

    New Old Member!

    Well been off here for a few years. Got really into my 01 Lightning, just sold the truck a few days ago now on the hunt for another mustang, glad to be back!
  4. Bramcavender

    What Injector is greyish/pink?

    I did a search but found alot of info that wasn't for sure. My friend went to ford and bought a new injector and they gave him a pink looking almost grey injector. The ones in it are all orange. Heres the thing now the car has a misfire on that cylinder. We checked coils/plugs wires. It misses...
  5. Bramcavender

    New Monty Engine Almost Alive!!

    It been a week since we started the Mercury Mount. engine swap and it's almost done. We have only worked on it after work this week. Put on longtubes, I think they were more work than the swap. X pipe, underdrives and new cai, I got some pics I'll post up later, and I'm hoping to have the beast...
  6. Bramcavender

    03 Monty Swap Question

    This has me puzzled, I got a 03 Merc Mounty engine for a swap into a 97 GT, I posted some q's about it before. Heres the thing when I got the engine I cranked it over by putting a ratchet on the crank pulley nut and it turned just fine. I swapped the front cover from my 97 and tried to crank it...
  7. Bramcavender

    Trickflow Cams?

    Wondering what you guys thought about these cams, and do I need to upgrade springs? I dont plan on cranking the motor thru the sky. Trick Flow Specialties TFS-51802001 - Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 4.6/5.4L 2-Valve Camshafts
  8. Bramcavender

    What Cam to Put In Monty Engine

    I know a few have this setup, what is the best all around cam to put in the 03 Mercury engine swap? Also are the oil pan/valve cover gaskets reusable at all? We have LT/x-pipe/pullies/cai already but I wanted to do a cam swap before droppin in the engine, thanks
  9. Bramcavender

    Heres the New Mountaineer Power

    Just wanted to give an update on the swap to 04 Mounty engine, it finally came in and we are waiting on LT's and X and a few items before the swap. I'm gonna try to post pics during the swap. this is my first modular adventure so it should be interesting. any advice is well appreciated since...
  10. Bramcavender

    Calgon take me Away from my T-5 woes

    Well looks like I broke stock T-5(aka crap) for the 4th/5th time I forget. What kind of manual trans are you guys running, and I mean running hard without breakage I've looked at the tko500/600 but seems like a pain to install in the '95.
  11. Bramcavender

    Wide Band vs Narrow Band

    i posted this in the tuning section also, I was wondering if one is better than other, I've heard the wide band is best but is a narrow band better than having nothing. I run a little rich(smells like gas) I wanted to tune it in better and of course the narrow band sensor is alot cheaper. Any...
  12. Bramcavender

    Narrow Band vs Wide Band

    I was gonna install a A/F gauge in my car, just to check the tune, is one better than the other Narrow band or wide band, thanks
  13. Bramcavender

    New PI Motor Or rebuilt Non PI

    Hey guys, I'm a newbie by the way. I have a 98GT that I was either considering doing a used PI motor swap, or rebuilding my motor with .30 forged pistons/stock crank/rods and ported Non PI heads, with long tubes and a few other bolt ons. My question is which would run better, which would you do...
Top Bottom
Back
Forums
Menu