Search results

  1. N

    1973 mustang convertable with roll bar

    Does anybody have a picture of a 1973 mustang convertable with a roll bar??
  2. N

    how much is it worth?

    I need to know how much this car is worth. I'm no longer interested in it and i need to sell it. The engine has about 20,000 miles and probobly puts out around 300 horsepower. The car itself has about 130,000 miles. it has a t-5 with a scattershield and a cable clutch, but it needs to be...
  3. N

    my suspension is really ****ed up and i need help

    i have a 65 with stock suspension. last week i went on a road trip and my top control arm broke(one of the two bolts snapped, turns out i had never greased it). so i replaced the bolts and the mount for the tca and it drove fine when i went to get the alignment done(at sears), but when i...
  4. N

    transmission problem

    i have t -5 in my 65 mustang and the third gear always pops put, is there some part i can take out of it and replace or does it need rebuilding. theres nothing else wrong with it.
  5. N

    do i need alignment?

    just changed upper control arm on one side. if i put the shims in their original place, do i need to get my alignment done.
  6. N

    clutch fork question.

    i have a 65 mustang but i think i will get the answer to my question here. i have a t-5 and i was wondering if anyone knows how high the ball stud for the clutch fork is supposed to be if im using a lakewood bellhousing for 87-94 mustang. the one i have sticks up about two inches and its too...
  7. N

    cable clutch setup question

    does anyone know how high the ball stud for the clutch fork is supposed to be if im using a lakewood bellhousing for 87-94 mustang. the one i have sticks up about one and ahalf inches and its too long. why wouldnt mine work if its made to be used with the t-5 bellhousing. i also have a...
  8. N

    suspension and brake problems.

    i left my house the other day, i get down the street and my brake pedal went straight to the floor(no pressure). i took off my front wheel to find some fluid dripping off the spindle fluid seems to be coming out right where there it some rubber around the piston. i also found that one of the...
  9. N

    carb swap

    these gas prices were killing me, so i traded my 600 speed demon double pumper in for a remanufactured edelbrock 1400 ( the leaned out version). ive think ive already saved 5 dollars in gas. i figgure it will pay for itself in 8-10 months. its not slow either, at full throttle, but at part...
  10. N

    carb swap

    sorry
  11. N

    wiring alarm into parking lights

    im almost finished installing an alarm into a 65 coupe. the alarm has one wire for the parking lights. my problem is the light switch has a separate wire for the front park lights and rear lights. when i turn on the parking lights, they all light up, but when i turn on the headlights, the front...
  12. N

    the car god is angry at me

    the other night my car poped out of gear and ran into a tree. there is a huge dent in my right front quarter and a little damage to my door. The reason for this is because my parking brake would not work with the new transmission mount associated with the t-5. i believe my exhaust was in the...
  13. N

    the car god is angry at me

    the other night my car poped out of gear and ran into a tree. there is a huge dent in my right front quarter and a little damage to my door. The reason for this is because my parking brake would not work with the new transmission mount associated with the t-5. i believe my exhaust was in the...
  14. N

    clutch problems

    hello everyone, I just recently pulled out the t-5 on my 65 mustang to replace the flywheel ring gear. my clutch (centerforce) worked fine before I did this, but now i get chattering, a soft peddle, and a whining sound which sounds like the throwout bearing. but it only does this about half the...
  15. N

    bad vibrations

    my car is still getting vibrations at higher speeds and progessivley gets worse. its a 65 with a new t-5 tranny and i just put in a new differential. its wierd, it will stop vibrating if i take my foot off the gas while its in gear, but if i take it out of gear, it vibrates even worse. the only...
  16. N

    scary steering

    I have a non-power steering 65 mustang. latly the steering has acting strange. sometimes it works fine, others it gets harder to turn it and the wheel will not turn back after i turn the car. I know some of the bushings are going bad under there, but is this a sign of a bad steering box?
  17. N

    starting problems

    I have a t-5 swaped into my 289 65 mustang. always had problems with the starter. the original starter i had the nose was not long enough and it would grind off the tip of the starter gear. I found a starter from a 79 mustang(my first stick was from a 79) it always worked, even after i put in...
  18. N

    stupid carburetor

    NEVER BUY A DEMON went to take my air cleaner off because my carb was leaking gas everywhere and the air cleaner bolt broke off how does it come out, do i have to drill it?
  19. N

    rearend woes

    Ive been drinving on the interstate a lot lately and i noticed a vibration at high speeds. Every time Ive driven at high speeds it got even worse. Now i can feel them at like forty. The only time they go away is when im driving it and I let go of the gas while it is in gear. It is an 8 inch...
Top Bottom
Back
Forums
Menu