Search results

  1. 9

    Pressure plate bolt torque

    What am I supposed to torque the pressure plate bolt to and also the flywheel bolts?. I am installing a CF DF clutch in my car. Also noticed that who ever put the last clutch in did not install the pilot bearing correct, I pulled the clutch off and the pilot bearing fell out. Doesn't it get...
  2. 9

    89 lx runs like crap dies all the time

    I just got an 89 lx new 306 ported e7's the car was built by a local speed shop. The motor only has near 1,000 miles. The motor shakes horrible off and on not all the time, and after getting on it it misses for the next mile or so. The car does not want to idle when first started. Wifey drove...
  3. 9

    rear brake bracket

    Does anyone know if the auto stores carry the bracket the caliper bolts to. My rear drivers side brakes took a crap. The caliper and the bracket it bolts to both locked up and destroyed the rotor and pad. So far I spent over 100.00 dollars and it is not done yet. I got lucky and the part that...
  4. 9

    will a 89-93 mass air meter work in a 95

    I have a 95 GT I am just wondeing if a mass air meter from 87-93 will work in our stangs. I am wanting to make a pipe to get rid of the bend in the rubber pipe from mass to throttle body. I am wanting a mass that will just plug and play. Will a mass from a lightning and the 42 lb. injectors go...
  5. 9

    What heads does an 88lx have

    A friend of mine from work has an 88 lx stock, I am wanting to buy a set of e7's. I can get his heads cheap if they are e7's for sure. I have a 95 I am wanting to get a set of heads and port them and throw them on the 95, will they go on a 95 and all accesories bolt up fine.. Thank you Ricky.
  6. 9

    will 79-93 turbo headers fit on 95 gt

    I am wanting to find a set of turbo headers and I am wanting to know if the ones made for a 79-93 fit on a 95 without any clearance issues.
  7. 9

    need help from cam experts

    I have a cam from a friends car, it has D5 then a backwards 5 then G2Q stamped on it and nothing else anywhere..
  8. 9

    need help from cam experts

    I have a cam from a friends car it has D5 then a backwards 5 then G2Q stamped on it, any help would be great.
  9. 9

    difference in clutches 87-93 vs 94-95

    What is the difference, I have a cf df clutch from my old 90 and I was wanting to know why it will not work in my 95 is there a spline difference.
  10. 9

    how to remove headlight switch knob

    I need to know where the button is on the headlight knob control. I need to remve my gauge cluster but I cannot seem to find the button.
  11. 9

    color of stock u/l on a 95 Gt & free mod tips wanted

    What is the factory color of the u/l control arms on a 95 Gt mine are red. Also what are some free modifications I can do to the car besides timing, already done.
  12. 9

    anderson pms or what for turbo

    I am wanting to go turbo, will an anderson pms work, or is there something better to go with. I am new to stangs, but I want a turbo. Thanks.
  13. 9

    what's the difference between GT and GTS

    I have a 95 and the title says GTS and I seen in the summit magazine a part for gt and gts what is the difference.
  14. 9

    what gear do I have

    My 95 has a z code I am wanting to know what gear it has..
  15. 9

    how do I adjust timing on my 95 Gt

    I just got a 95 Gt yesterday, I traded my 90 lx for it, I am wanting to know some of the free mods and how to adjust timing. thanks Ricky.. I looked for the search forum link but could not find the window..
  16. 9

    need help asap on holley

    I have a holley on my truck I am trying to sell. I need to fix the carb asap. I have a 3310 750 vac. secondary. It is running very rich. I got on a site to see how to adjust but they will not tell you , you have to buy a book. But the site did say if you adjust the air mixture screws all the...
  17. 9

    has anyone had any toruble installing a Dr. Gas x-pipe with BBK longtubes.

    I bought a Dr. Gas X-pipe for my BBK longtubes and tried to install it, and there was no way in hell it was going to fit. So I call up Dr. Gas and ask them about it and the guy says you have to trim fit the front pipes off of the header. So I did this and it only made it worse. I cut little bit...
  18. 9

    does ford stamp #'s on rods from factory

    I have a 90 lx and I just dropped the oil pan while in the car, I looked at my rods and they are all numbered. I know if you have your rods reconditioned they will stamp them to keep the caps from being mixed up.
  19. 9

    I saw a crazy fast Firebird last night at Kil-Kare

    I saw a Firebird at Kil-Kare run an amazing run in the 1/8th mile last night, 3.94@207mph I also saw a station wagon from Sinclair community college that runs the 1/4 at 179 mph also seen a Astro van run side to side with the grocery getter. OOPs I forgot to mention the Firebird had a JET...
  20. 9

    BBK long tubes collector size??

    I bought a set of long tube bbk,s 1,3/4 in. I am wanting to get an X pipe and need to know what size to get for the ball collector to fit. Thanks for the help guys..
Top Bottom
Back
Forums
Menu