Search results

  1. fasterdamitt

    Koni Active struts n shocks

    Time for me to upgrade the suspension again on my DD. Car started with Ford Racing track kit, when turned a DD I needed to remove it due to harshness. Went with BMR 009 springs and Strange adjustable shocks. Three of the Strange's have gone South internally in a year so time to get rid of them...
  2. fasterdamitt

    Shopping for Trick Flow Heads, anywhere lower than Summit

    I see about a year ago Summit sold these for $999. Now they are $1299. less $100. in Summit bucks. Not bad but before I drop the hammer I wondered if I was missing a good deal elswhere. #51400004 or 51400010 I did search the web, CJ Pony and Dallas Mustang had a Labor day sale but they would...
  3. fasterdamitt

    Is my 347 cranking cylinder pressure too high

    I have a 347 EFI I just checked compression on and was thinking this may be a little high for 91 octain. What's you opinions? 190-200 psi?? 347 stroker Flat Top SRS AFR 185's 72cc XE270HR hyd roller Mass Flow Efi system
  4. fasterdamitt

    Piston ring end gap too large, advise?

    I am freshening up my 347 with a hone and new rings. Pistons still have .005 clearance as recommended. I have Probe #10660-40 pistons and ordered Summit Racing's .040 rings to install. I went to measure the end gap on the top ring and came up with .030! The Perfect Circle used rings I just...
  5. fasterdamitt

    3 shortblocks, rebuilt heads, still knocks. Help!

    Ok guys, I have a good one. I bought this 347 with a bad crank so I thought I'll just reuse the block and build from there. Well three teardowns later, it has the same knock in all three builds. Help! The knock is only below 190 deg. It's noticable at idle, but loud under load. Once it warms...
  6. fasterdamitt

    Should I run 35 profile tires?

    I'm looking for a little help here since I have not run anything lower than 50 series on my Stang. I have a Jaguar I am upgrading to 18,19,or20's. The 18's will fit 45 series but the 19 and 20's need a 255-35 to fit. How do these tires ride on rough roads? I see alot of people running these low...
  7. fasterdamitt

    Would you run 35 profile tires?

    I'm looking for a little help here since I have not run anything lower than 50 series on my Stang. I have a Jaguar I am upgrading to 18,19,or20's. The 18's will fit 45 series but the 19 and 20's need a 255-35 to fit. How do these tires ride on rough roads? I see alot of people running these low...
  8. fasterdamitt

    Listen to this!

    I have been having a little problem with two new 331 short blocks now. I built the first one and thought I had a loose piston. So I bought this one. They both have a knock at idle and low rpm. This time I replaced everything except the heads, springs and rockers. Here's a sound clip, hopefuly...
  9. fasterdamitt

    67 Stang SSM bars or CalTracs??

    Strip/Street use. 70% street. Leaf spring car. I can't decide which ones to get. I know Caltracs are probably the best but I heard they could be a little noisy for street use and more difficult to put on. Any input on SSM bars or CalTracs??
  10. fasterdamitt

    What posi to buy???

    Street with strip maybe 3 times a year. I have a early Lock-rite now and the backlash sucks on the mountain roads. 8"
Top Bottom
Back
Forums
Menu