Search results

  1. M

    Progress Thread mkk50's Progress Thread

    Wanted to finally post some details out into one of these.. both chronicling the journey of how things go to where they are today and hopefully into the future! Bought a 91 Fox back in 2005/2006 - had roughly 100k miles on it then. It was lowered with Eibach progressive rate springs (it was...
  2. M

    Evr Solenoid

    I tried searching on this specific point, but couldn't find a good answer. I assume that the EVR Solenoid (which controls vacuum to the EGR) should hold vacuum when applied, is this correct? Just got a brand new OEM one to replace an original which was not holding vacuum, and the new solenoid...
  3. M

    Subframe Connector Installation

    I have been recently looking to get a set of subframe connectors installed, but am having trouble finding a good place to have it done. I live in Central/Northern NJ, but would also like to have some additional work done when installing the connectors, if possible. The car has been in Jersey...
  4. M

    Code 67 / Ngs Wiring Issue

    I have been trying to fix a code 67 issue on my car for a while, and need some help/direction. I measured the voltage on pin 30 at the computer, and see 5 volts there. I then tested the voltage at the NGS sensor on the transmission (manual), and dont see the corresponding 5 volts. I ohm...
  5. M

    Auto Body Shops in Central/Nothern NJ

    I was wondering if any1 on here had any good experience/recomendations for auto body shops in Central/Northern NJ. I am hoping to get my car painted relatively soon, and would also like to get other parts sanded/primed. There is some rust starting on the bottom, nothing too serious I think...
  6. M

    E-Brake Cable Guides

    Does anyone know what the E-Brake cable guides are called/where they can be purchased? Im talking about the little football shaped plastic guides that are under the car near the driveshaft. I cant find them anywhere!
  7. M

    Ford Racing Chrome Cobra R Wheels and Tires

    Up for sale is 4 Ford Racing 17x9 Chrome Cobra R Wheels. These wheels have Pirelli P-zero Nero M&S tires on all 4, in 275/40/17. Two of the tires are almost fully worn out, and two of the tires are fairly new. These wheels were driven in several NJ winters, so the chrome is peeling on the...
  8. M

    What do you think of these...

    I got the idea to put these guides on my stock fox seats. What do you guys think? Im tired of the seat belt resting on my neck. I think these style ones go well with the boxy foxy.
  9. M

    One Sneaky Picture

    Here is one new picture of my car, after a good bit of work. The last pictures of my car seen is the one in my avatar. What you guys think? P.S - the wheels and tires on there are not staying, even tho i think they look great, i will be selling them and getting some 17x8's, the 9's are just...
  10. M

    GT Brakes Question

    I got the master cylinder/booster off of a 95 Mustang GT. The Master Cylinder has Bendix inscribed on the end of it, is that normal? Also, is the GT booster the same as the cobra booster from the M2300K package? This thing is huge haha. Also, does anyone have pictures of where the mount for...
  11. M

    Rear Disc brake Q's

    I know alot of people on here have converted their foxes to rear disc brakes, and done the mod to the e-brake handle. I was wondering if it would be possible to use the e-brake handle out of a newer mustang. I looked at one recently and they looked to share the same bolt pattern.
  12. M

    Drum brakes noises

    I have the stock drum brakes on my 91 mustang, however I have changed all the springs/hardware, and the shoes, however when coming to a stop, i can hear a clunking noise coming from the rear brakes, which seems to speed up/slow down relative to the wheel speed. Could this be the master...
  13. M

    Code 94/44 Problems

    Shortly before I pulled these codes, I had an egr/throttle body gasket fail, which applied vacuum to the cooling system and sucked all 5 gallons through the engine. I have fixed that problem, however now I seem to be having problems with code 94/44. I checked the TAB/TAD solenoids, and both...
  14. M

    Wiring Diagrams

    Does anyone know a good place to find complete wiring diagrams? The ones in the Chilton manual just dont cut it.
  15. M

    302 Engine Block Q's

    I found a used 302 block recently that I got around to cleaning and inspecting today. On both sides, there is cracks in the head mounting surface that run from what looks like the water jacket to the cylinder bore. Are these something that can be fixed, or is this block a 140 pound paperweight?
  16. M

    Automatic Climate Control

    My parents used to have a 91 thunderbird, which came with automatic climate control. Has anyone ever tried fitting this into a fox mustang?
  17. M

    Fuel Slosh Module Q's

    I have a Florida 5.0 Gauge cluster in my car, which i must say is very nice. However, the fuel gauge likes to bounce around quite a bit, which while harmless i believe, can get annoying. I would like to wire a slosh module into this cluster, however i cannot find any diagrams on the wiring for...
  18. M

    Autometer Speedometer Q

    Hello, I have a Autometer Speedometer, which comes with an adapter to convert from the clip on speedometer cable to a threaded one. It also came with a small extension piece so that the cable would be long enough. Recently, my speedometer cable snapped so I had to replace the orignal...
  19. M

    Computer Ground Wire Question

    I recently purchased a new negative battery cable. Its from Motorcraft and comes with the computer ground wire quick connect attachment thingy. However, the other end that plugs into that on my car is just a crimp connector that whoever had it before me put on. Is there any place to get a...
  20. M

    Best Mas/Maf

    Ok, i have a C&L 73mm maf calibrated for 19#ers, and at light throttle above 2k the engine pings, and when using the stock maf and changing nothing else, it doesnt ping. Is there any other aftermarket maf out there that wont cause this? im in no rush but im planning to buy the tfs kit soon and...
Top Bottom
Back
Forums
Menu