Search results

  1. FoxRod87

    adjustable clutch cable

    I had an aftermarket cable break on my old 87 in the Tractor Supply parking lot. But I had another one at the house. Got someone to come get me and I got the stuff and changed it in the parking lot. So I'm just going to keep the stock cable and change the other stuff later.
  2. FoxRod87

    Which is more beneficial?

    Yes I would do the intercooler and then get longtubes and a good tune.
  3. FoxRod87

    60' times with Nitto Drag and then BFG's or MT's?

    Thanks for all the help guys. I'll try to get to a better prepped track to see what they will do. I think that is why the 60' times aren't that good. BTW the Nitto DR's are the best rain tire I have ever had. They hook the road so well for some reason. Even with the Monsoon rains we've had the...
  4. FoxRod87

    How to remove fog lights?

    Just jack the car up in the air and remove the 3 screws and you will be fine.
  5. FoxRod87

    No compression after cams

    Out of time or bent valves.
  6. FoxRod87

    How long does your 4.6 take to warm up?

    My 96 Gt warms up in about a mile or two and The 03 gt warmed up in about 5 to 6 miles. So not sure what the difference between the two are. The 96 doesn't overheat or nothing. It just warms up quicker.
  7. FoxRod87

    60' times with Nitto Drag and then BFG's or MT's?

    So how are you suppose to launch them? And how big of a burnout do I need to do? Thanks
  8. FoxRod87

    60' times with Nitto Drag and then BFG's or MT's?

    What are some of you guys getting at the track with Nitto's and then what are you getting with MT's and BFG's? On my Nitto's I can only get 2.10s out of them and no better. And that is with like 15lbs of air in them. How much time can I drop with a better set of tires? Thanks.
  9. FoxRod87

    who's running bigs and littles?

    I'll try to get some pics of my buddies 03 Mach. He has 15x10 prostars on the the back and 15x3.5s on the front. It looks good. You have to do some grinding on the front caliper brackets and use wheel spacers.
  10. FoxRod87

    Comp Cams XE270AH Sound at idle

    Who cares about reving! I would just let it idle. I sounds sick.
  11. FoxRod87

    Installing PI Intake! Woot!

    Just drill and tapp the whole yourself. The alum. is really soft and the drill will go right through it. Just get the correct tapp and drill bit it calls for and you'll be fine. I got mine from NAPA. But I think the Tapp was around 20-30 dollars. So you might be better off letting someone else...
  12. FoxRod87

    Symptons for bad Crank Position Sensor?

    I guess the Crank sensor was it. It hasn't missed a lick yet.
  13. FoxRod87

    Symptons for bad Crank Position Sensor?

    Well my car started this morning. So hopefully it is fixed.
  14. FoxRod87

    Symptons for bad Crank Position Sensor?

    Has anyone had one go out before? My car woundn't crank yesterday after I got off work. Didn't throw any codes. Checked for fuel and found fuel. Checked for spark and it didn't have any spark. Then it all of a sudden had spark. Ran it home and it ran fine and this morning it wouldn't start. So...
  15. FoxRod87

    Camshaft Choices

    Antirice98 Your car sounds wicked. I love good sounding cams and tailpipes. They just make them sound alot better.
  16. FoxRod87

    K Member Actual Track Gains

    I mean he went from a 7.80 with the kmember and then he sprayed a 75 shot and got 7.30s at almost 100mph.
  17. FoxRod87

    PI Intake???

    yes it is a PI intake. The 1st intake runner comes from the right.
  18. FoxRod87

    X Pipe Install Help

    And a good 1/2" drive impact like a IR titainium. Can't remember the # on the impact.
  19. FoxRod87

    K Member Actual Track Gains

    you will see gains with the whole kmember and coilover kit. My buddies Mach run 7.80s with prostars biggies and skinnys on et streets. But he never run it before he done all the work. Went 7.30s with a 75 shot spinning hard. Then he broke the rear upper control arm. They were upr's prostreet's...
  20. FoxRod87

    Steeda UDP's 2001-2004

    Look at the SLP UDP's at slpshop.com. They look exactly the same as the Steeda's but they are on sale now for 120.00. The Steeda's have an SFI approved dampner. The cheaper one's are a piggyback style. I have heard they are worth 7-8 rwhp. BTW the Sonata's have 240HP. I drove one and they are no...
Top Bottom
Back
Forums
Menu