Search results

  1. unrealmach1

    Thanks

    I know this is not a tech question but, I just wanted to say thanks to everyone for all the help over the years. My Mach is finally on the road. I still have a few bugs to work out and I know I will still need help, but thanks everyone.Here is a link to some pics. :SNSign...
  2. unrealmach1

    69 sportroof roof rail weatherstrip

    Anyone replace these and have a fitment issue? Right in front of the quarter window the new seals I bought have a weird lump and don't fit in the channel. Every time you open the quarter window it causes the seal to pull out. Also the new seal leaves a small hole exposed in the quarter . Both...
  3. unrealmach1

    69 mustang rear glass and package tray

    ANyone have pic of the inside rear window area on a 69 fastback? Is there a trim piece on the top at the headliner like in the front? What about at the package tray near the window?
  4. unrealmach1

    69 Mustang Parts in MI

    Ok, I went through a lot of stuff and this is what I think I have so far. parts are for a Fastback. They are the original parts off my car and are all used. I will sell as an entire lot for $750 obo. Email requests >> >> Both front fenders. Pass not bad, but Drivers needs ($200 for both)...
  5. unrealmach1

    69 Windshield

    I was looking for a windshield for my 69 Fastback and the local glass companies only have a choice of coupe, convertible, or hardtop. Anyone know which windshield for a fastback? I am guesing hardtop, but I have never seen a fastback called a hartop before. Anyone know?
  6. unrealmach1

    351w intakes

    I read somewhere a discussion on shakers and someone was saying the performer rpm intake moved the carb back further in the engine compartment. Is this true? I know it is taller than stock. The problem I have is the shaker on my car seems to sit back 2-3" too far to come through the original...
  7. unrealmach1

    351w shaker base

    I read somewhere that the 351w base moves the scoop further forward than the 351c base. Anyone know if this is correct?
  8. unrealmach1

    Shift Knob

    I have a t handle with the 12mm x 1.75 thread, but I replace the stick with a hurst stick that has a 3/8"-16 thread. Does anyone make an adapter for this? This is a common mustang knob size and most aftermarket shift stick are this size, so I would think someone made an adapter? any ideas?
  9. unrealmach1

    70 motor mounts??

    I am trying to install some clipster headers I bought a few years back and they are not fitting ver well in my 69. I was looking through some paper and the said to use '6611/42-'70 motor mounts? Are the 70 mounts different than the 69? I thought they are the same? I have a 351w. Pass side hit...
  10. unrealmach1

    Undercover Speakers

    Anyone use the Undercover 2 speakers from Custom Autosound? Wondering how they sound. Thanks
  11. unrealmach1

    Roof Rail Sash

    I thought I saw some where that they are making the Stainless Roof Rail Sash for 69 sportroofs? Anyone know if this is true and where to buy them?
  12. unrealmach1

    t5 shifter handle

    I am putting a T5 in my '69 an the trans has a Hurst shifter on it, but no handle. Can anyone recommend a good one? I kind of like the hurst handle CJ's sells for the t5 conversion, but I am hoping to find one cheaper. Anyone know what the specs on for a good fit for a handle? I was kind of...
  13. unrealmach1

    69 steering column

    Anyone have pics of how the steering column mount under the dash on a 69? Someone else removed my column and now I need to reinstall, but not sure how it mounted. The mount towards the top that wraps around the steering column, how does it bolt to the dash/pedal support? Is that a bracket with...
  14. unrealmach1

    Classic Auto Air HELP!!!

    Hi Guys, I purchased a Classic Auto Air "Perfect Fit" AC system for my '69 Mach1 and I am having trouble with the mounting brackets. At first they sent me the wrong brackets, but they repalced them with what are supposed to be the correct brackets and I am not sure how they fit? I have a 351w...
  15. unrealmach1

    Pigeon Forge, TN Mustang and Ford Show

    Anyone know what weekend this show is? I see several sites that listed it as this weekend and several that list it as next weekend.
  16. unrealmach1

    Radiator US on Ebay

    Anyone ever buy from them? I am looking for a radiator for my 69 Mach1. I am running a 393W with a manual trans and A/C. I also want to go with an electric fan. Any advice on where to go or what to buy would be great. Here is a link to Radiator US on ebay...
  17. unrealmach1

    351w oil pan gasket

    Anyone know the correct part number for a Fel-Pro 1 piece oil pan gasket? I have a an '94 roller block and the oil pan with dimples in the rigid around the bolts. I know they make one for smooth pans and one for dimples, but I can't find the right part number.
  18. unrealmach1

    Clutch Help

    Anyone know of a stock diaphram clucth kit that I could get from someplace like Autozone that would fit a '68 302? I thought the flywheel (157t) would fit 10 or 10.5? Would something form like an '80's mustang or bronco fit? I am converting from FMX to a T-5Z ( t-5 bellhousing) with the JMC...
  19. unrealmach1

    69 Mach1 Project Progress

    Hi Guys, My Mach is finally starting to come together. Paint just got sprayed this week and I thought you guys might like to see what all your great advice has helped build. Thanks!!! http://i206.photobucket.com/albums/bb149/unrealmach1/69%20Mach1/passfull.jpg...
  20. unrealmach1

    budget 393

    I was wondering if anyone has built a 393 strokers with the 3.850 crank, stock 351w rods, and 302 pistons? I was wondering what work needs to be done to the block? Are their any clearance issues? I have heard yes and no. What parts did you use if you didn't have any issues? What pistons do I...
Top Bottom
Back
Forums
Menu