Search results

  1. 1

    93 Cobra owners... Please help!!!!!!!

    I really, really need some help concerning 93 Cobra front rotors. Would somebody be so kind to measure the total height of a 93 Cobra front rotor as if it was laying down flat. I've read where they have a 3/4 inch taller "hat" on them, compared to a GT rotor. I'm needing some extra tire-to-shock...
  2. 1

    Will 93 Cobra Rotors bolt right on to a 90 GT?

    I'm looking for a little extra clearance with the oem 93 Cobra wheels on my 90 GT. I've read where the Cobra rotors have a taller "hat" on them. Will the 93 Cobra rotors directly work on a 90 GT, or would I have to change something else also? Thanks for your help.
  3. 1

    93 Cobra wheels rubbing right shock on 90 GT. What's my options?

    Ok...here's the deal. I took my 93 Cobra wheels off of my wrecked 90 GT and installed them on my good 90 GT. I never had any major issues with them on the old car, except maybe some minor rubbing on the inner fender shield in a tight turn. When I bought the good car I put the cobra wheels on...
  4. 1

    On a 90 GT... removed bell housing and 3 or 4 inch long steel cylinder hit floor.

    We were removing the bell housing when the throwout bearing and a mysterious piece of steel (3 or 4 inches long and cylinder shaped...hollow on the inside) hit the floor. Can someone please tell me what this piece is? Thank you so much for any help you have to offer.
  5. 1

    How far to drive pilot bearing in?

    I was wondering how far to drive the pilot bearing in during replacement. It's going in a 90 GT. Thanks for your help.
  6. 1

    Mustangs Unlimited sold me Redline MTL for my T5 tranny. Is that ok to use?

    Is the Redline MTL ok to use in a T5 transmission. Is it Mercon III compatible? Thanks for your input.
  7. 1

    Best mounting points for engine hoist chains? Please help

    I'm about to swap motors in my 90 GT and I was wondering where is the best place to hook the two chain attachments on an engine hoist. I don't have a lift plate for the intake, even though that looks to be the most stable way. Also, what is the best bolt holes to use when mounting on an...
  8. 1

    water pump gasket: paper with or without permatex?

    Just wondering if I should add water pump permatex gasket to the fel-pro paper gaskets I bought, when installing a waterpump on a 90 GT. Thanks for your input.
  9. 1

    Value of a stock 306 bottom end? please input

    I have a 306 motor that a guy is interested in and he is willing to pull it out of my wrecked car. He only wants the bottom end (which is rebuilt, not forged, and has about 50k miles on it). I'm gonna keep the gt40 heads and edelbrock intake. How much do I ask for it, being fair to him and...
  10. 1

    got a major leak in A/C condenser...please give input

    I just got back from having my A/C charged, which didn't last but about 30 seconds. We found a huge leak in the condenser that I knew nothing about. I just bought this car at the end of last year (90 GT). I have another 90 GT parts car here at home and I thought I would just swap condensers...
  11. 1

    In pitch black darkness i can see voltage running through spark plug wires. Normal?

    I was getting my exhaust done the other day on my 90 GT and when i was leaving the guy said it sounding like i had a spark plug wire loose or off. he said he heard some arcing. I checked under the hood that night and i could see voltage running through my spark plug wires mainly in the place...
  12. 1

    What could cause me to lose power steering under heavy braking?

    My 90 GT becomes very hard to steer under heavy braking. Its like i lose the power in power steering. I also have about 2 inches of play in the steering wheel at all times. Please, any help would greatly be appreciated.
  13. 1

    Anyone running a BBK X-PIPE for long tubes on your 94-95?Please help Need measurement

    Can some kind-hearted mustang brother do me a HUGE favor and give me some measurements of their 94-95 BBK X-PIPE for long tubes...mainly the width where it meets the headers (outer edge to outer edge) and a straightline measurement of the length from end to end (short and long side) Here's...
  14. 1

    difference in throttle body gasket and egr spacer gasket?

    I need both. I have one here at home, but I dont know which it is, so I dont know which one I need to buy. I can only find the TB gasket locally...no luck on egr spacer gasket. Can one be used for the other and vice versa? Any help greatly appreciated.
  15. 1

    Front bumper cover bolts to fender spinning inside bumper cover

    Anyone ever had this problem. They are made into the bumper cover so there is no way to hold the other end of the bolt. I've got a dremel tool and the only ideas I have is to cut a flathead slot on the end of the bolt so I can hold it with a screwdriver or holding it with vise grips, backing nut...
  16. 1

    Difference in 90 and 91 fenders?

    I'm in the process of moving inner fenders and radio antenna from wrecked car to good one. Both are 90 GT's. My wrecked car had a bolt in the door jamb holding on my fenders, but my "good" car has no bolt in the door jamb. There's not a bracket to put a bolt in right there. I was just wondering...
  17. 1

    Please help. I need a rpm signal for shift light.

    I'm having a problem wiring up my shift light on my 90 GT. It was not wired up when I bought the car recently. The previous owner told me when I wire it up to put red to switch power, black to ground, and green to coil. But everywhere I read I've seen where people say if you have a MSD box...
  18. 1

    fitting MT lower shift boot on AT transmission tunnel

    Ok here's the deal. I bought a 5-speed 90 GT a few weeks ago and I've finally got around to replacing the lower shift boot on it because it was missing. Well, I gutted the interior and and was confused about how the transmission tunnel was different than my 90 GT donor car. After a little...
  19. 1

    8.8 differential cover- paper gasket or RTV or BOTH? please input

    I was just wondering how most people seal up the differential. I bought a Felpro paper gasket at autozone. Then, I happened to think that I may need some silicone gasket maker, so I asked the guy at autozone and he recommmended the heat resistant RTV silicone (red). But I have little faith in...
  20. 1

    Can someone plz do a carfax report for me

    I bought a 91 GT rolling chassis the other day and have found some damage to the underbody that I dont think the previous owner is being totally honest about. He says a friend of his ran over a recap in the road. Please, any help would be greatly appreciated. VIN = 1FACP42E8MF159298
Top Bottom
Back
Forums
Menu